2510.25497v3

# Right for the Right Reasons: Avoiding Reasoning Shortcuts via Prototypical Neurosymbolic AI **Authors**: - Luca Andolfi (Imperial College London, Sapienza University of Rome) - &Eleonora Giunchiglia (Imperial College London) Abstract Neurosymbolic AI is growing in popularity thanks to its ability to combine neural perception and symbolic reasoning in end-to-end trainable models. However, recent findings reveal these are prone to shortcut reasoning, i.e., to learning unindented concepts–or neural predicates–which exploit spurious correlations to satisfy the symbolic constraints. In this paper, we address reasoning shortcuts at their root cause and we introduce Prototypical Neurosymbolic architectures. These models are able to satisfy the symbolic constraints (be right) because they have learnt the correct basic concepts (for the right reasons) and not because of spurious correlations, even in extremely low data regimes. Leveraging the theory of prototypical learning, we demonstrate that we can effectively avoid reasoning shortcuts by training the models to satisfy the background knowledge while taking into account the similarity of the input with respect to the handful of labelled datapoints. We extensively validate our approach on the recently proposed rsbench benchmark suite in a variety of settings and tasks with very scarce supervision: we show significant improvements in learning the right concepts both in synthetic tasks (MNIST-EvenOdd and Kand-Logic) and real-world, high-stake ones (BDD-OIA). Our findings pave the way to prototype grounding as an effective, annotation-efficient strategy for safe and reliable neurosymbolic learning. The code is available on our r4rr Github page 1 Introduction Neurosymbolic AI [36, 12] (NeSy) holds the promise of being able to combine the high adaptability of neural networks with the reasoning abilities of more traditional AI. This results in methods that are more interpretable [11, 4, 8], able to learn from fewer labelled datapoints [2, 49, 35] and are compliant by-design with the given constraints [1, 18]. However, recent studies [28, 31] have shown that even state-of-the-art NeSy methods can fall prey of reasoning shortcuts, i.e., (intuitively) spurious associations among the learnt concepts—a.k.a. the neural predicates [26] –that satisfy the given symbolic constraints and yet violate the intended semantics. Some attempts have already been made to address the problem, however existing mitigation strategies carry practical trade-offs. For example, the solution proposed in [31] involves dense annotation of a high number of datapoints which can be costly. On the other hand, unsupervised solutions like training jointly with a reconstruction loss [31] or the Shannon entropy [27] work only in limited settings, but fail when applied in more challenging scenarios like those in rs-bench [5]. In this paper, we address reasoning shortcuts at their root cause and we introduce Prototypical Neurosymbolic architectures. Thanks to the prototypes, our mitigation strategy requires minimal annotations and delivers extremely positive results even in challenging scenarios like those in rs-bench. The work is based on the simple intuition that whenever we are updating the weights of our neural network, we need to take into account two possibly orthogonal factors: (i) the satisfaction of the background knowledge and adherence to the available ground truth labels, which NeSy methods naturally do, and (ii) the similarity of the input with respect to the handful of labelled datapoints. We show that if prototypical networks are used in conjunction with NeSy methods, then both factors are taken into account at each weights update step. On the contrary, when using NeSy methods in conjunction with standard neural networks, this cannot happen. We also show that under the assumption of clusterability in the embedding space, the number of deterministic shortcuts gets significantly reduced. We extensively validate our approach on the recently proposed rsbench [5] benchmark suite in a variety of settings and tasks with very scarce supervision: we show significant improvements in learning the right concepts both in synthetic tasks (MNIST-EvenOdd and Kand-Logic) and real-world, high-stake ones (BDD-OIA). As an example, with just one labelled datapoint for each concept, we are able to increase the F1-score macro over the concepts for the standard DeepProbLog [26] from $4\%$ to $96\%$ in the MNIST-EvenOdd task and from $25\%$ to $94\%$ on the Kand-Logic task. 2 Problem Statement Notation. As customary, we denote scalar constants in lower-case $x$ , random variables $X$ in upper case, and ordered sets of constants ${\mathbf{x}}$ and random variables ${\mathbf{X}}$ in bold typeface. We also will denote the set $[1,... n]$ as $[n]$ and the prior knowledge as K. Setting. In line with previous work [28, 31] we consider an underlying ground-truth <details> <summary>figures/theory/data_generation_process.png Details</summary>  ### Visual Description ## Flowchart Diagram: System Process Flow ### Overview The image depicts a flowchart with five nodes labeled **S**, **G**, **X**, **Y**, and **C**, connected by directional arrows. The diagram uses a minimalist design with black arrows (except one blue arrow) on a white background. Nodes are represented as circles, with **S** and **G** at the top, **X** and **Y** in the middle, and **C** at the bottom. ### Components/Axes - **Nodes**: - **S** (Top-left) - **G** (Top-right) - **X** (Center-left, gray-shaded) - **Y** (Center-right, gray-shaded) - **C** (Bottom, blue-shaded) - **Arrows**: - Black arrows connect **S → X**, **G → X**, **X → Y**, and **Y → C**. - A single **blue arrow** connects **Y → C**, diverging from the black arrows. - **No axes, legends, or numerical scales** are present. ### Detailed Analysis - **Flow Direction**: - **S** and **G** both feed into **X**. - **X** directs output to **Y**. - **Y** directs output to **C** via a **blue arrow**, while a black arrow also points from **Y → C** (redundant or parallel path?). - **Color Coding**: - **Gray shading** for **X** and **Y** may indicate intermediate processing stages. - **Blue shading** for **C** could signify a final output or critical endpoint. - The **blue arrow** from **Y → C** is unique, suggesting a distinct relationship (e.g., feedback, exception, or priority path). ### Key Observations 1. **Redundant Path**: The presence of both black and blue arrows from **Y → C** implies ambiguity in the process flow. This could represent: - A primary path (blue) and a secondary path (black). - A feedback loop (blue) alongside a linear progression (black). 2. **Hierarchical Structure**: The diagram suggests a top-down flow, with **S** and **G** as inputs, **X** and **Y** as processing stages, and **C** as the output. 3. **No Data Labels**: No numerical values, percentages, or textual descriptions are provided to quantify relationships. ### Interpretation - **Process Flow**: The diagram likely represents a system where inputs (**S**, **G**) converge at **X**, which processes data to **Y**, ultimately producing **C**. The blue arrow may highlight a critical or alternative route to **C**. - **Ambiguity in Flow**: The dual arrows from **Y → C** require clarification. This could indicate: - A conditional branch (e.g., success vs. failure paths). - A feedback mechanism where **C** influences **Y**. - **Design Intent**: The use of color (gray for intermediates, blue for the final node/arrow) emphasizes the endpoint **C** and its unique connection to **Y**. ### Conclusion This flowchart outlines a conceptual process flow with inputs (**S**, **G**), intermediate stages (**X**, **Y**), and an output (**C**). The blue arrow introduces ambiguity, suggesting a need for further clarification on its purpose (e.g., feedback, exception handling). Without additional context or data, the diagram serves as a high-level schematic rather than a quantitative model. </details> Figure 1: Ground truth generation process (in black). data generation process $p^{*}(\mathbf{X},\mathbf{Y};\textsc{K})$ having form as illustrated in Figure 1, where (i) $\mathbf{X}$ is the ordered set of random variables with domain $\mathcal{X}$ representing the datapoints in our learning problem, (ii) $\mathbf{Y}$ is the ordered set of $r$ discrete random variables with domain $\mathcal{Y}$ representing the ground truth labels in our learning problem, (iii) $\mathbf{G}$ is the ordered set of $k$ discrete random variables ranging in $\mathcal{G}=[h_{1}]×...×[h_{k}]$ , which influence the observed datapoint and determine the ground truth label, and (iv) $\mathbf{S}$ is a finite ordered set of random variables which influence the observed data but not the ground truth labels. A NeSy predictor is a model that infers the labels $\mathbf{Y}$ by reasoning over the background knowledge K and a set of $k$ discrete concepts $\mathbf{C}$ (taking values in $\mathcal{C}$ with the assumption that $\mathcal{C}=\mathcal{G}$ ) extracted from the sub-symbolic input $\mathbf{X}$ . The background knowledge is assumed to be given beforehand. **Example 1** *(MNIST-Addition [26]) In this classic problem, the pair of MNIST images $\mathbf{x}=(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_3.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_2.png}}})$ and their ground truth label $5$ is determined by the ground truth concepts $\mathbf{g}=(3,2)$ . The writing style $\mathbf{s}$ only influences the appearance of those digits. The ground truth concepts and the labels are compliant with the background knowledge $\textsc{K}=(Y=G_{1}+G_{2})$ .* Goal. Our goal is to learn the parameters $\theta$ of a NeSy predictor $p_{\theta}(\mathbf{Y}\mid\mathbf{X};\textsc{K})$ such that $p_{\theta}(\mathbf{C}\mid\mathbf{x})=p^{*}(\mathbf{G}\mid\mathbf{x})$ , for all $\mathbf{x}∈\mathcal{X}$ . The reasoning shortcut problem. The reasoning shortcut problem arises because we do not have access to the ground truth $\mathbf{G}$ but only to a proxy of it, i.e., $\bf{Y}$ . Let $\mathcal{D}=\{(\mathbf{x}_{i},\mathbf{y}_{i})\}_{i=1}^{n}$ be a finite dataset, the we say that a NeSy predictor $p_{\theta}$ takes a reasoning shortcut (RS) if $p_{\theta}$ achieves maximal log-likelihood $\mathcal{L}$ on the training data but it does not match the ground truth distribution, i.e., $$ \mathcal{L}(p_{\theta},\mathcal{D},\textsc{K})=\max_{\theta^{\prime}\in\Theta}\mathcal{L}(p_{\theta^{\prime}},\mathcal{D},\textsc{K})\text{\quad and \quad}p_{\theta}(\mathbf{C}\mid\mathbf{X})\neq p^{*}(\mathbf{G}\mid\mathbf{X}), \tag{1} $$ where $\mathcal{L}(p_{\theta},\mathcal{D},\textsc{K})=\frac{1}{|\mathcal{D}|}\sum_{(\mathbf{x},\mathbf{y})∈\mathcal{D}}\log p_{\theta}(\mathbf{y}\mid\mathbf{x};K)$ . Observe every RS corresponds to a deterministic optimum for $\mathcal{L}$ . **Example 2** *(Ex. 1, Cont’d.) Consider a restriction of the dataset where the ground truth for all datapoints is either $\mathbf{g}=(0,6)$ or $\mathbf{g}^{\prime}=(2,8)$ . Assume $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ is a deterministic distribution so that $p_{\theta}((5,5)\mid(2,8))≈ 1.0$ and $p_{\theta}((3,3)\mid(0,6))≈ 1.0$ . A NeSy predictor $p_{\theta}$ whose (i) distribution $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ is as shown before and (ii) likelihood $\mathcal{L}(p_{\theta},\mathcal{D},\textsc{K})$ is maximal, takes a RS.* 3 Prototypical Neurosymbolic AI Our goal is to learn the parameters $\theta$ of a NeSy predictor $p_{\theta}(\mathbf{Y}\mid\mathbf{X};\textsc{K})$ such that $p_{\theta}(\mathbf{C}\mid\mathbf{x})=p^{*}(\mathbf{G}\mid\mathbf{x})$ for all $\mathbf{x}∈\mathcal{X}$ . However, in absence of any labelled datapoints, the network might take reasoning shortcuts as there is nothing more than the loss over the labels $\bf{Y}$ to guide the network. For ease of presentation, we first assume we have at least one labelled datapoint for each concept, and then we drop such assumption. Given a finite dataset $\mathcal{D}$ and a concept $c$ , let $$ \mathcal{S}_{c}=\{\mathbf{x}\mid(\mathbf{x},\mathbf{y})\in\mathcal{D},c\in\mathbf{y}\} \tag{2} $$ be support set for concept $c$ . This is the available set of datapoints which we can use to “anchor” the representation of each concept, hence avoiding the RS problem. For every concept $c$ we create a centroid or prototype $\mathbf{c}_{c}∈\mathbb{R}^{m}$ starting from $\mathcal{S}_{c}$ i.e., a representative vector where all datapoints belonging to concept $c$ should be mapped to. To this end, we use $k$ prototype extractors (one for each set of mutually exclusive concepts in $\mathcal{C}$ ). Each prototype extractor is an embedding function $f^{i}_{\mathbf{\theta}}:\mathbb{R}^{d}→\mathbb{R}^{m_{i}}$ for $i∈[k]$ with learnable parameters $\theta$ which allows us to compute the centroids: $$ \mathbf{c}_{c}=\frac{1}{|\hat{\mathcal{S}}_{c}|}\sum_{\mathbf{x}\in\hat{\mathcal{S}}_{c}}{f^{i}_{\theta}(\mathbf{x})},\text{\qquad for }i\in[k], \tag{3} $$ where $\hat{\mathcal{S}}_{c}⊂eq\mathcal{S}_{c}$ is a randomly sampled subset of $\mathcal{S}_{c}$ . For every prototype extractor $f^{i}_{\theta}(\mathbf{x})$ , we define a distance $\rho:\mathbb{R}^{m_{i}}×\mathbb{R}^{m_{i}}→[0,+∞)$ , and, for every new input $\mathbf{x}$ , we decide to which concepts it belongs to by measuring its distance to each of the prototypes. In [42], it was shown that for a particular class of distance functions, called the regular Bregman divergences family [3], the prototypical networks algorithm is equivalent to performing mixture density estimation on the support set with an exponential family density. In this work we choose as distance the squared Euclidean distance—itself belonging to the Bregman divergences family—as it will allow us to meaningfully initialize the centroids of the unspecified classes. It is now possible to produce a distribution over the concepts based on a softmax over distances between $\mathbf{z}_{i}=f^{i}_{\theta}(\mathbf{x})$ and the prototypes of each class: $$ p_{\theta}(c\mid\mathbf{x},c\in[h_{i}])=\frac{\exp(-||\mathbf{z}_{i}-\mathbf{c}_{c}||^{2}_{2})}{\sum_{c^{\prime}\in[h_{i}]}\exp(-||\mathbf{z}_{i}-\mathbf{c}_{c^{\prime}}||^{2}_{2})}\text{\qquad for }i=[k]. \tag{4} $$ We train the prototype extractors to perform two tasks: (i) correctly classify the datapoints in the query set for class $c$ : $\mathcal{Q}_{c}=\mathcal{S}_{c}\setminus\hat{\mathcal{S}}_{c}$ if available (i.e., $\mathcal{Q}_{c}\not=\emptyset$ ) and (ii) make predictions that are coherent with the background knowledge K for all the datapoints in the training set $\mathcal{D}$ which are not labelled with a concept. An overview of the training procedure can be seen in Algorithm 1. We now relax the previous assumption that each concept must have at least one labelled datapoint, hence we can have a concept $c$ such that $\mathcal{S}_{c}=\emptyset$ . Instead, we require only that, within each set of mutually exclusive concepts (i.e., for every $[h_{i}]$ with $i∈[k]$ ), there exist at least two datapoints labelled with two distinct concepts. This condition ensures that we can express the centroids of concepts without labelled examples as functions of the centroids of concepts with at least one labelled instance. Let $c∈[h_{i}]$ for some $i∈[k]$ be a concept for which there are no labelled datapoints in the training dataset $\mathcal{D}$ . Let $\mathcal{H}_{i}⊂eq[h_{i}]$ be the set of concepts for which there exists a labelled datapoint in $\mathcal{D}$ . Then the centroid for $c$ can be computed as $$ \mathbf{c}_{c}=\boldsymbol{\mu}_{\mathcal{H}_{i}}+\epsilon,\quad\text{with}\quad\epsilon\sim\mathcal{N}\left(0,\;\frac{\max_{c\in\mathcal{H}}\|\boldsymbol{\mu}_{\mathcal{H}_{i}}-\mathbf{c}_{c}\|_{2}^{2}}{\chi^{2}_{m,p}}\,\mathbf{I}_{m}\right), \tag{5} $$ where $\boldsymbol{\mu}_{\mathcal{H}_{i}}=\frac{1}{|\mathcal{H}_{i}|}\sum_{c^{\prime}∈\mathcal{H}_{i}}\mathbf{c}_{c^{\prime}}$ represents the mean of the known centroids in $[h_{i}]$ , and $\chi^{2}_{m,p}$ is the $p$ -th lower-tail quantile of a $\chi^{2}$ distribution with $m$ degrees of freedom. Unless explicitly stated, the parameter $p$ is set to $0.99$ in our experiments. This ensures that, for each class $c$ , the newly initialized centroid $\mathbf{c}_{c}$ has probability $0.99$ (over the random draw of $\epsilon$ ) of lying within the hyperball whose radius is given by the distance from $\boldsymbol{\mu}_{\mathcal{H}_{i}}$ to the farthest known centroid. This encourages separation among mutually exclusive classes, while reducing the risk that a zero-shot prototype is placed far from the region spanned by the known embeddings, which could otherwise lead to prototype collapse, where multiple concepts are mapped to a single, constraint-satisfying centroid. In the remainder, we will call a NeSy predictor that uses prototype extractors as outlined above a prototypical NeSy predictor. Algorithm 1 Training episode loss computation. $l_{i}$ is the number of classes sampled per set $\mathcal{H}_{i}$ and training episode. $s_{c}$ (resp. $q_{c}$ ) is the number of support (resp. query) examples per concept $c$ . 1: (i) Dataset $\mathcal{D}$ , (ii) support set $\mathcal{S}_{c}$ for every concept $c$ . 2: Output the loss $\mathcal{L}$ for a randomly generated training episode. 3: $\mathcal{L}← 0$ 4: for $i∈\{1,...,k\}$ do 5: $\mathcal{E}←\textsc{RandomSample}(\mathcal{H}_{i},l_{i})$ $\triangleright$ Select classes per episode and prototype extractor 6: for $c$ in $\mathcal{E}$ do 7: $\hat{\mathcal{S}}_{c}←\textsc{RandomSample}(\mathcal{S}_{c},s_{c})$ $\triangleright$ Select support examples 8: $\mathcal{Q}_{c}←\textsc{RandomSample}(\mathcal{S}_{c}\setminus\hat{\mathcal{S}}_{c},q_{i})$ $\triangleright$ Select query examples 9: $\mathbf{c}_{c}←\frac{1}{s_{i}}\sum_{\mathbf{x}∈\hat{\mathcal{S}}_{c}}{f_{\theta}^{i}}(\mathbf{x})$ $\triangleright$ Compute centroids for labelled classes 10: for $\mathbf{x}$ in $\mathcal{Q}_{c}$ do 11: $\displaystyle\mathcal{L}←\mathcal{L}+\frac{1}{l_{i}q_{i}}\left[||\mathbf{z}_{i}-\mathbf{c}_{c}||_{2}^{2}+\log\sum_{c^{\prime}∈[h_{i}]}\exp(-||\mathbf{z}_{i}-\mathbf{c}_{c^{\prime}}||_{2}^{2}))\right]$ 12: for $c∈[h_{i}]\setminus\mathcal{H}_{i}$ do 13: $\mathbf{c}_{c}←\boldsymbol{\mu}_{\mathcal{H}_{i}}+\epsilon$ $\triangleright$ Compute centroids for unlabelled classes 14: for $(\mathbf{x},\mathbf{y})∈\mathcal{D}$ do 15: $\mathcal{L}←\mathcal{L}+\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})$ $\triangleright$ If necessary for NeSy model, compute NeSy loss 4 Reasoning over Distances Thanks to the prototypes, given an input $\mathbf{x}$ , for every $i∈[k]$ the embedding $\mathbf{z}_{i}$ is updated taking into consideration not only the degree of constraints violation but its similarity to each centroid. **Theorem 4.1** *Let $\mathbf{y}$ be the output of a prototypical NeSy predictor reasoning over the knowledge K and the set of concepts $\mathcal{C}=[h_{1}]×...×[h_{k}]$ . If the predictor is trained using $\mathcal{L}^{\text{\rm{NeSy}}}(\mathbf{y},\textsc{K})$ , then for every $i∈[k]$ the error calculated with respect to the embedding $\mathbf{z}_{i}$ is equal to: $$ \nabla_{\mathbf{z}_{i}}\mathcal{L}^{\text{\rm{NeSy}}}(\mathbf{y},\textsc{K})=2\sum_{c\in[h_{i}]}\frac{\partial\mathcal{L}^{\text{\rm{NeSy}}}}{\partial y_{c}}y_{c}\Big(\mathbf{c}_{c}-\sum_{c^{\prime}\in[h_{i}]}y_{c^{\prime}}\mathbf{c}_{c^{\prime}}\Big). \tag{6} $$* Proof in Appendix A. Let us call the term $\sum_{c^{\prime}∈[h_{i}]}\mathbf{c}_{c^{\prime}}y_{c^{\prime}}$ the centre of belief for datapoint $\mathbf{x}$ and set of classes $[h_{i}]$ of the model, as it is the average over all the prototypes representing the classes in $[h_{i}]$ weighted by the probability assigned to each class by the model. The embedding $\mathbf{z}_{i}$ is thus updated in a way that ensures that—in the next learning iteration—the centre of belief for the datapoint $\mathbf{x}$ is closer to the weighted average over the distances of the prototype of each class to the centre of belief. The weights take into account both: (i) the degree of constraint violation, as captured by the magnitude of the gradient $|∂\mathcal{L}^{\text{\rm{NeSy}}}/∂ y_{c}|$ and (ii) how close the embedding is to a prototype, as captured by the $y_{c}$ term. The embedding update thus allows us at each step to try to satisfy the constraints while also taking into account the similarity between each class prototype and the embedding of the datapoint. Notice that the same does not happen when training standard neural networks with a NeSy loss. In that case, even if we have some labelled datapoints, for the unlabelled datapoints the update will obviously only depend on the error done with respect to the NeSy loss, thus creating a fertile ground for reasoning shortcuts (especially as the number of unlabelled datapoints grows). We now show what the embedding update looks like in the specific case of the semantic loss [49]. Given an input $\mathbf{x}$ and its corresponding output $\mathbf{y}$ we can write NeSy semantic loss as: $$ \mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})=-\log\sum_{\nu\models\textsc{K}}\prod_{c\in\bigcup_{i}{[h_{i}]}}(y_{c})^{\nu(c)}(1-y_{c})^{1-\nu(c)}, \tag{7} $$ where each $\nu:\bigcup_{i}{[h_{i}]}→\{0,1\}$ represents (with a slight abuse of notation) a boolean assignment of the concepts in $\bigcup_{i}{[h_{i}]}$ . We say that an assignment $\nu$ satisfies the knowledge K expressed as a propositional logic formula, denoted by $\nu\models\textsc{K}$ , if and only if the recursive evaluation of formula K under assignment $\nu$ yields $1$ . For every $c∈\bigcup_{i}{[h_{i}]}$ we define an independent Bernoulli random variable $Y_{c}\sim\text{Bernoulli}(y_{c})$ . This induces a distribution over full truth assignments $\nu:\bigcup_{i}{[h_{i}]}→\{0,1\}$ . Then, we can rewrite the semantic loss as: $\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})=-\log\sum_{\nu\models\textsc{K}}p(\nu\mid\mathbf{y}).$ **Corollary 4.2** *Let $\mathbf{y}$ be the output of a prototypical NeSy predictor reasoning over the knowledge K and the set of concepts $\mathcal{C}=[h_{1}]×...×[h_{k}]$ . If the predictor is trained using semantic loss $\mathcal{L}^{\text{\rm{NeSy}}}(\mathbf{y},\textsc{K})$ as defined in Equation 7, then for every $i∈[k]$ the error calculated with respect to the embedding $\mathbf{z}_{i}$ is equal to: $$ \nabla_{\mathbf{z}_{i}}\mathcal{L}^{\text{\rm{NeSy}}}(\mathbf{y},\textsc{K})=2\sum_{c\in[h_{i}]}\Big[\frac{y_{c}-\mathbb{E}[Y_{c}\mid\mathbf{y},\nu\models\textsc{K}]}{y_{c}(1-y_{c})}\Big]y_{c}(\mathbf{c}_{c}-\sum_{c^{\prime}}\mathbf{c}_{c^{\prime}}y_{c^{\prime}}). \tag{8} $$* Proof in Appendix A. The above theorem shows that the embedding is moved closer to each centroid $\mathbf{c}_{c}$ by a value proportional to (i) the distance between $\mathbf{z}_{i}$ and $\mathbf{c}_{c}$ and (ii) to the difference between $y_{c}$ and the expected value of $Y_{c}$ conditioned on the satisfaction of the knowledge. **Example 3** *Suppose $\mathcal{C}=[h_{1}]×[h_{2}]$ where $[h_{1}]$ represents the concepts $\{\text{Dog, Cat, Duck,}$ $\text{Shark}\}$ and $[h_{2}]$ represents the concepts $\{\text{Mammal,}$ $\text{Bird, Fish}\}$ . Let $\textsc{K}=(\text{Dog}\vee\text{Cat}→\text{Mammal})\wedge(\text{Duck}→\text{Bird})\wedge(\text{Shark}→\text{Fish)}$ . Suppose we have an image $\mathbf{x}$ of a dog, whose embedding $\mathbf{z}_{1}$ is represented by <details> <summary>figures/symbols/cross.png Details</summary>  ### Visual Description ## Icon: Red X Symbol ### Overview The image depicts a bold, solid red "X" centered on a plain white background. No additional graphical elements, text, or contextual details are present. ### Components/Axes - **No axes, labels, legends, or numerical data** are visible. - The "X" is a standalone graphic element with no embedded text or metadata. ### Detailed Analysis - **Color**: The "X" is uniformly red (#FF0000 in hexadecimal). - **Shape**: The "X" consists of two diagonal lines intersecting at 90-degree angles, forming a symmetrical cross. - **Positioning**: The "X" is centered both horizontally and vertically within the frame. - **Background**: The background is a neutral, unadorned white (#FFFFFF). ### Key Observations - The simplicity of the design suggests it is intended for high-contrast visibility. - The red color is commonly associated with prohibition, cancellation, or error signaling in user interfaces. ### Interpretation This icon likely represents a universal symbol for "no," "cancel," or "incorrect" actions. Its use in digital interfaces (e.g., buttons, warnings) is standardized to convey negative responses or rejections without requiring textual explanation. The absence of additional context implies it is meant to function as a standalone directive. **Note**: No factual or numerical data is present in the image. The analysis is limited to the symbolic and design properties of the "X." </details> in Figure LABEL:fig:center_of_belief. $\mathbf{z}_{1}$ ’s squared distances from the centroids are equal to the numbers next to the dotted lines. The centre of belief for $\mathbf{x}$ and $[h_{1}]$ is represented as <details> <summary>figures/symbols/star.png Details</summary>  ### Visual Description ## Icon/Symbol: Yellow Star Graphic ### Overview The image depicts a single, solid yellow star with five points. It is centered on a plain white background. The star has a uniform fill color with no gradients, patterns, or textures. There are no textual elements, labels, or numerical data present. ### Components/Axes - **Shape**: Five-pointed star (pentagram) with sharp, symmetrical points. - **Color**: - Fill: Bright yellow (#FFD700 approximate). - Outline: Thin black border. - **Background**: Solid white (#FFFFFF). - **Text**: None detected. ### Detailed Analysis - **Star Geometry**: - Points are evenly spaced at 72° intervals. - No internal subdivisions or annotations. - **Color Consistency**: - Yellow fill matches standard "gold" or "star yellow" hex codes. - Black outline is uniform in width (~1-2px). - **Positioning**: - Star occupies ~70% of the image area, centered both horizontally and vertically. - No alignment markers or gridlines visible. ### Key Observations 1. **Simplicity**: The design is minimalistic, with no additional elements. 2. **Contrast**: High contrast between yellow fill and black outline enhances visibility. 3. **Purpose**: Likely intended as a symbolic icon (e.g., rating, achievement, or decorative element). ### Interpretation This image appears to be a generic star icon, commonly used in user interfaces, ratings systems, or decorative contexts. The absence of text or data suggests it is not tied to quantitative information but rather serves as a visual metaphor. The choice of yellow may imply positivity, energy, or attention-grabbing intent. Without additional context, its specific meaning remains open to interpretation (e.g., a "5-star" rating, a symbol of excellence, or a navigational aid). **Note**: No factual or numerical data is present in the image. All descriptions are based on visual analysis of shape, color, and composition. </details> . Let $\mathbf{z}_{2}$ have distance 2, 3, 4 from the prototypes of Mammal, Bird and Fish, respectively. The magnitude of the error computed with semantic loss by our method wrt Dog, Cat, Duck and Shark is $\sim\!2.0$ , $\sim\!0.3$ , $\sim\!0.25$ and $\sim\!5× 10^{-4}$ , thus mirroring the importance that each centroid has to the class prediction. On the contrary, if we were to use a standard neural network with semantic loss we would get that the errors for each of the above outputs all have magnitude of $\sim\!1.0$ .* 5 Counting Deterministic Reasoning Shortcuts We now analyse the number of possible deterministic RSs admitted by a prototypical NeSy predictor. To isolate the structural sources of shortcuts, we work in an idealized setting where we assume that [A1] the distribution $p^{*}(\mathbf{X}\mid\mathbf{G},\mathbf{S})$ is induced by a map $\phi\colon(\mathbf{g},\mathbf{s})\mapsto\mathbf{x}$ , where $\phi$ is invertible and smooth over $\mathbf{s}$ , [A2] the ground-truth process is consistent with the prior knowledge K: the distribution $p^{*}(\mathbf{Y}\mid\mathbf{G};\textsc{K})$ is induced by a deterministic mapping $\beta_{\textsc{K}}\colon\mathbf{g}→\mathbf{y}$ and $p^{*}(\mathbf{y}\mid\mathbf{g};\textsc{K})=0,$ for all $(\mathbf{g},\mathbf{y})$ violating K, and [A3] we have separability in the embedding space. This means that given a bijective assignment $\sigma:\mathcal{G}→\mathcal{G}$ such that $\sigma(\mathbf{g})_{i}∈[h_{i}]$ with $i=[k]$ , it holds that for every datapoint $\mathbf{x}=\phi(\mathbf{g},\mathbf{s})$ $$ \text{arg\!}\min_{j\in[h_{i}]}||f_{\theta}^{i}(\mathbf{x})-\mathbf{c}_{j}||_{2}^{2}=\sigma(\mathbf{g})_{i}. \tag{9} $$ Intuitively, all datapoints associated to the same concept $g∈[h_{i}]$ , will have the embedding $f_{\theta}^{i}(\mathbf{x})$ closest to a centroid $\mathbf{c}$ , but this centroid might be labelled with the wrong concept, i.e., it is not necessary that $g=\sigma(\mathbf{g})_{i}$ . Observe that, under [A1], each $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ is induces exactly one mapping $\alpha:g\mapsto c$ , such that $p_{\theta}(\mathbf{C}\mid\mathbf{G})=\text{1}\{\mathbf{C}=\alpha(\mathbf{G})\}$ . We denote as $\mathcal{A}$ the set of all mappings $\alpha$ . As shown in [31], the cardinality of $\mathcal{A}$ can be reduced leveraging disentangled concept extractor architectures: when a model is disentangled then $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ factorizes as $\prod_{i=1}^{k}p_{\theta}(C_{i}\mid G_{i})$ . In prototypical NeSy models the conditional distribution $p_{\theta}(\mathbf{Y}\mid\mathbf{X};\textsc{K})$ is induced by $k$ prototype extractors with embedding function $f^{i}_{\theta}\colon\mathbb{R}^{d}→\mathbb{R}^{m_{i}}$ , for every $i∈[k]$ : under independence assumption, then our design enforces disentanglement by construction. **Proposition 5.1** *Consider a prototypical NeSy predictor inducing $p_{\theta}(\mathbf{Y}|\mathbf{X};\textsc{K})$ . Assume $\mathcal{G}=$ $[h_{1}]×...×[h_{k}]$ and let $\mathcal{H}_{i}⊂eq[h_{i}]$ be the set of concepts with at least one labelled datapoint from a dataset $\mathcal{D}$ . Under [A1,2,3] the number of deterministic optima for $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ is $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ is $$ \sum_{\alpha\in\mathcal{A}}\text{1}\Big(\bigwedge_{\mathbf{g}\in\mathrm{supp}(\mathbf{G})}\Big(\bigwedge_{i\in[k]}\bigwedge_{g_{j}\in\mathcal{H}_{i}}(\alpha(\mathbf{g})_{i}=g_{i}\wedge g_{i}=g_{j})\Big)\wedge\Big((\beta_{\textsc{K}}\circ\alpha)(\mathbf{g})=\beta_{\textsc{K}}(\mathbf{g})\Big)\Big), $$ $\alpha$ being the mapping induced by $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ and $\mathcal{A}$ being the set of all possible mappings $\alpha$ .* Remarkably, by leveraging [A3], we achieve the same number of RSs obtained by the dense data-mitigation strategy proposed in [31]. This assumes that every supervised concept receives annotations for every datapoint in which it occurs. Hence, thanks to the prototypes, the labelling effort can be substantially reduced. Indeed, Proposition 5.1 implicitly assumes that for every $i∈[k]$ we have one labelled datapoint per class $g_{i}∈[h_{i}]$ . 6 Experimental Analysis Metrics. We evaluate the models coherently with [28, 31, 5] and we distinguish between the classes that are labelled as “ final labels ” and as “ concepts ”. We measure the accuracy and F1-score wrt. both, denoted resp. as Acc(Y), F1(Y), Acc(C) and F1(C), and the concept collapse Cls(C). Tasks. (i) MNIST-EvenOdd [28, 30]: is a variant of MNIST-Addition with restricted support. Each input is a pair of handwritten digits (concepts) labelled with their sum (final label). (ii) Kand-Logic [34, 30]: features the shape ( $\square$ , , $\triangle$ ) and color (red, yellow, blue) of geometric primitives (concepts), possibly defining a pattern to be predicted (final label). (iii) BDD-OIA [50]: an autonomous driving task proposing frames labelled with the actions to be undertaken by the ego-vehicle (final labels). The goal is to correctly classify the reasons (concepts) behind each action. Models. For all tasks, we consider DeepProbLog [26] (DPL), Logic Tensor Networks [2] (LTN) and Semantic Loss [49] (SL), as implemented in [5], and we integrate them with prototypes. For MNIST-EvenOdd, we also consider Coherent by Construction Networks (CCN +) [18]. RQ1: Can Prototypical Neurosymbolic AI avoid Reasoning Shortcuts? To answer RQ1, we randomly label just one image per concept class in MNIST-EvenOdd and Kand-Logic. We then train each Prototypical NeSy model (SL+PNet, LTN+PNet, DPL+PNet) with support sets of size 10 and 9 for MNIST-EvenOdd and Kand-Logic, respectively. For BDD-OIA we (a) MNIST-EvenOdd concept confusion matrices. annotate 126 images—almost the size of one training batch—with 21-dimensional binary vectors. We compare our results against: (i) the standard NeSy baselines (SL, LTN, and DPL), and (ii) the same models whose backbones are pretrained on annotated support sets enriched with over 150 additional datapoints obtained via data augmentation for both MNIST-EvenOdd and Kand-Logic, as detailed in Appendix E (denoted as SL+Pre ⋆, LTN+Pre ⋆, and DPL+Pre ⋆). No data augmentations were used for BDD-OIA. This second baseline demonstrates that, even on a simple dataset such as MNIST-EvenOdd, the use of prototypical networks can substantially outperform extensive data augmentation. Conversely, for Kand-Logic, the performance gap is minimal, which can be attributed to the high homogeneity of the concepts in this dataset. The results for MNIST-EvenOdd and Kand-Logic are shown in Tables 3 and 3. We observe that Prototypical NeSy models greatly outperform the standard baselines in the MNIST-EvenOdd task: for example LTN’s Acc(C) jumps from $13\%$ to $95\%$ while Cls(C) drops from $~80\%$ to $0\%$ . The enhanced concept alignment is even more evident comparing the confusion matrices in Figure 5(a) for the SL model. While on Kand-Logic the gain wrt. concept metrics may appear less stark due to their homogeneity, it carries significant improvements for the right prediction of the final label as shown in Table 10 in Appendix F, thus indicating a strong synergy between the symbolic and the neural components. Lastly, the superior ability of prototypical models to mitigate reasoning shortcuts (RSs) is also evident on BDD-OIA. As shown in Table 3, our PNet model reduces Cls(C) by more than half compared to both baselines, while achieving an F1(C) score that is more than twice as high as the best performing baseline. A more detailed analysis of RQ1 is provided in Appendix F. Table 1: Concept scores on MNIST-EvenOdd. | LTN LTN+Pre ⋆ LTN+PNet | 0.13 $± 0.07$ 0.51 $± 0.22$ 0.95 $± 0.03$ | 0.05 $± 0.04$ 0.39 $± 0.25$ 0.95 $± 0.03$ | 0.79 $± 0.08$ 0.45 $± 0.23$ 0.00 $± 0.00$ | | --- | --- | --- | --- | | SL | 0.08 $± 0.12$ | 0.04 $± 0.04$ | 0.68 $± 0.04$ | | SL+Pre ⋆ | 0.52 $± 0.25$ | 0.42 $± 0.28$ | 0.40 $± 0.24$ | | SL+PNet | 0.98 $± 0.01$ | 0.98 $± 0.01$ | 0.00 $± 0.00$ | | DPL | 0.08 $± 0.10$ | 0.04 $± 0.05$ | 0.67 $± 0.05$ | | DPL+Pre ⋆ | 0.64 $± 0.22$ | 0.55 $± 0.28$ | 0.32 $± 0.24$ | | DPL+PNet | 0.97 $± 0.03$ | 0.96 $± 0.04$ | 0.00 $± 0.00$ | | CCN + | 0.03 $± 0.07$ | 0.01 $± 0.03$ | 0.73 $± 0.05$ | | CCN + +Pre ⋆ | 0.33 $± 0.11$ | 0.22 $± 0.10$ | 0.57 $± 0.09$ | | CCN + +PNet | 0.96 $± 0.04$ | 0.95 $± 0.05$ | 0.00 $± 0.00$ | Table 2: Concept scores on Kand-Logic. | LTN LTN+Pre ⋆ LTN+PNet | 0.36 $± 0.06$ 0.90 $± 0.01$ 0.91 $± 0.01$ | 0.22 $± 0.06$ 0.90 $± 0.01$ 0.90 $± 0.01$ | 0.64 $± 0.16$ 0.00 $± 0.00$ 0.00 $± 0.00$ | | --- | --- | --- | --- | | SL | 0.35 $± 0.05$ | 0.20 $± 0.04$ | 0.73 $± 0.12$ | | SL+Pre ⋆ | 0.91 $± 0.01$ | 0.90 $± 0.01$ | 0.00 $± 0.00$ | | SL+PNet | 0.92 $± 0.02$ | 0.92 $± 0.02$ | 0.00 $± 0.00$ | | DPL | 0.39 $± 0.05$ | 0.25 $± 0.06$ | 0.66 $± 0.18$ | | DPL+Pre ⋆ | 0.92 $± 0.04$ | 0.91 $± 0.04$ | 0.00 $± 0.00$ | | DPL+PNet | 0.94 $± 0.00$ | 0.94 $± 0.00$ | 0.00 $± 0.00$ | Table 3: Concept scores on BDD-OIA. | DPL DPL+Pre ⋆ DPL+PNet | 0.08 $± 0.13$ 0.05 $± 0.13$ 0.16 $± 0.15$ | 0.82 $± 0.06$ 0.85 $± 0.04$ 0.35 $± 0.11$ | | --- | --- | --- | RQ2: How does Prototypical NeSy compare with other mitigation strategies? We consider the three mitigation strategies, and combinations thereof, as proposed in [27] and [31]. These are: (i) Shannon-entropy regularization (H): regularizing the models using the Shannon-entropy, (ii) partial loss concept supervision (C): taking a subset of the concepts and labelling all (a) F1(C) on MNIST-EvenOdd across unlabelled data ratios. the corresponding datapoints in the dataset—following [31], we label the concepts “4” and “9”, (iii) reconstruction loss (R): introducing an encoder-decoder architecture and training the model to jointly minimise $\mathcal{L}^{\text{NeSy}}$ and the reconstruction loss wrt the input. We carry out the comparison with our Prototypical NeSy models on the MNIST-EvenOdd task under the same settings for RQ1. The results obtained with each of these strategies and their combination are shown in Table 4. Crucially, each of the mitigation strategies in isolation does not manage to curb the RS problem, even with a costly solution like labelling all the datapoints where concepts “4” and “9” appear through C. Only by using them all together we get comparable results for DPL and LTN, while only F1(C) $=0.35$ for SL. Table 4: F1(C) and Cls(C) of different mitigations on MNIST-EvenOdd. Best results in bold. | $+$ R | F1(C) $(\uparrow)$ DPL $0.07{\mbox{\scriptsize$± 0.00$}}$ | Cls(C) $(\downarrow)$ SL $0.01{\mbox{\scriptsize$± 0.00$}}$ | LTN $0.05{\mbox{\scriptsize$± 0.02$}}$ | DPL $0.70{\mbox{\scriptsize$± 0.00$}}$ | SL $0.70{\mbox{\scriptsize$± 0.00$}}$ | LTN $0.70{\mbox{\scriptsize$± 0.00$}}$ | | | --- | --- | --- | --- | --- | --- | --- | --- | | $+$ H | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.55{\mbox{\scriptsize$± 0.14$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | $0.08{\mbox{\scriptsize$± 0.02$}}$ | | | $+$ C | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.22{\mbox{\scriptsize$± 0.01$}}$ | $0.12{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | $0.60{\mbox{\scriptsize$± 0.01$}}$ | $0.71{\mbox{\scriptsize$± 0.00$}}$ | | | $+$ R+H | $0.09{\mbox{\scriptsize$± 0.02$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.61{\mbox{\scriptsize$± 0.10$}}$ | $0.63{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | $0.21{\mbox{\scriptsize$± 0.16$}}$ | | | $+$ R+C | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.46{\mbox{\scriptsize$± 0.07$}}$ | $0.10{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | $0.47{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | | $+$ H+C | $0.96{\mbox{\scriptsize$± 0.06$}}$ | $0.31{\mbox{\scriptsize$± 0.07$}}$ | $\mathbf{0.98}{\mbox{\scriptsize$± 0.00$}}$ | $0.03{\mbox{\scriptsize$± 0.05$}}$ | $0.50{\mbox{\scriptsize$± 0.00$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | | | $+$ R+H+C | $\mathbf{0.98}{\mbox{\scriptsize$± 0.00$}}$ | $0.35{\mbox{\scriptsize$± 0.10$}}$ | $0.95{\mbox{\scriptsize$± 0.00$}}$ | $0.02{\mbox{\scriptsize$± 0.00$}}$ | $0.50{\mbox{\scriptsize$± 0.01$}}$ | $0.04{\mbox{\scriptsize$± 0.00$}}$ | | | $+$ PNet | $0.96{\mbox{\scriptsize$± 0.04$}}$ | $\mathbf{0.98}{\mbox{\scriptsize$± 0.01$}}$ | $0.95{\mbox{\scriptsize$± 0.03$}}$ | 0.00 $± 0.00$ | 0.00 $± 0.00$ | 0.00 $± 0.00$ | | RQ3: Are Prototypical NeSy models robust wrt. the number of unlabelled datapoints? In Section 4 we show how Prototypical NeSy models update their parameters accounting at the same time both for the background knowledge and the proximity to each class centroid. With this RQ we validate the extent to which this update makes them less sensitive than traditional NNs to the amount of weakly supervised datapoints used at training time. To this end, we create 10 training subsets of MNIST-EvenOdd containing the original support sets together with a varying percentage of unlabelled examples (from $10\%$ to $100\%$ with a step increase of $10\%$ ). Then we train on these subsets (i) our prototypical models and (ii) baseline models whose backbone is pretrained using the support sets (Pre ⋆, c.f. RQ1) and receiving additional supervision from them during training (C(S) ⋆). (a) F1(C) and Cls(C) on BDD-OIA across different percentages of unlabelled datapoints. The green dotted line represents the baseline non-supervised DPL. We report the comparison in Figure 7(a) wrt. F1(C). The Figures show that models employing traditional concept extractors struggle in effectively exploit the knowledge at hand. Moreover, they are particularly unstable and sensitive to both the network initialization and the number of unlabelled datapoints. On the flip side, prototypical ones use the background knowledge to refine their concept understanding and converge to stable solutions as more unlabelled data become available. We run a similar experiment for BDD-OIA as well, where we consider a standard DPL model employing on extractor per concept that replicates the same disentanglement granularity of the prototypical counterpart. This model is also supervised through the support set. Figure 9(a) left (resp. right) shows that, as the number of unlabelled datapoints grows, the F1(C) (resp. Cls(C)) for standard DPL greatly decreases (resp. increases). On the contrary, the prototypical model is robust wrt. to this percentage and it consistently outperforms in both metrics the standard model. RQ4: What is the impact of having totally unlabelled classes? Ideally, one would like to have at least one labelled example for each class. In this RQ we test our approach for cases in which such assumption does not hold and we initialize the centroids for Table 5: F1(C) when having different numbers of concepts left unspecified on Kand-Logic. | 0 1 2 | $0.94{\mbox{\scriptsize$± 0.00$}}$ $0.65{\mbox{\scriptsize$± 0.03$}}$ $0.42{\mbox{\scriptsize$± 0.02$}}$ | $0.92{\mbox{\scriptsize$± 0.02$}}$ $0.73{\mbox{\scriptsize$± 0.03$}}$ $0.55{\mbox{\scriptsize$± 0.04$}}$ | $0.90{\mbox{\scriptsize$± 0.01$}}$ $0.64{\mbox{\scriptsize$± 0.02$}}$ $0.41{\mbox{\scriptsize$± 0.02$}}$ | | --- | --- | --- | --- | | Baseline | $0.25{\mbox{\scriptsize$± 0.06$}}$ | $0.22{\mbox{\scriptsize$± 0.04$}}$ | $0.22{\mbox{\scriptsize$± 0.06$}}$ | the unknown classes as in Equation 5. We also test our method with different numbers of totally unlabelled classes, running each experiment 5 times and randomly sampling each time the classes to leave unlabelled. In addition, for RQ4 and RQ5, we increase the support sets variety via standard augmentation techniques, as we found our models to perform slightly better in this case. The results obtained on MNIST-EvenOdd in terms of F1(C) and F1(Y) are shown in Figure 12(a) and those on Kand-Logic in terms of F1(C) in Table 5. As expected, from Figure 12(a) and Table 5 we notice the more classes we are able to specify (i.e., provide examples for) the better the results. Crucially, even with minimal labels provided (e.g. two/four labelled images) Prototypical NeSy methods mitigate RSs. (a) F1(C) and F1(Y) obtained with Prototypical NeSy models trained on MNIST-EvenOdd when varying the number of unlabelled classes. The red lines indicate the performance of the corresponding baseline model. RQ5: How important is the centroid initialization for unlabelled classes? As explained in Section 4, it is important to make sure that the centroids for the unlabelled <details> <summary>x1.png Details</summary>  ### Visual Description ## Line Chart: F1(C) vs Number of Hidden Classes ### Overview The chart displays three line series representing the relationship between the number of hidden classes (x-axis) and F1(C) score (y-axis). Each line corresponds to a different probability value (p=0.2, p=0.5, p=0.99), with shaded regions indicating variability/confidence intervals. The lines trend upward as the number of hidden classes decreases, with higher p-values showing stronger performance. ### Components/Axes - **X-axis**: "Number of hidden classes" (integer values from 8 to 1, decreasing left to right) - **Y-axis**: "F1(C)" (continuous scale from 0.0 to 1.0) - **Legend**: Located in the top-left corner, with three entries: - Dotted blue line: p=0.2 - Dashed green line: p=0.5 - Solid orange line: p=0.99 - **Shaded Regions**: Light-colored bands surrounding each line, representing confidence intervals or variability. ### Detailed Analysis 1. **p=0.2 (Dotted Blue Line)**: - Starts at ~0.15 (x=8) and rises to ~0.45 (x=1). - Shaded region spans ~0.10–0.20 at x=8, widening to ~0.30–0.50 at x=1. - Trend: Gradual increase with moderate variability. 2. **p=0.5 (Dashed Green Line)**: - Starts at ~0.20 (x=8) and rises to ~0.55 (x=1). - Shaded region spans ~0.15–0.25 at x=8, widening to ~0.40–0.65 at x=1. - Trend: Steeper increase than p=0.2, with higher variability at lower hidden classes. 3. **p=0.99 (Solid Orange Line)**: - Starts at ~0.30 (x=8) and rises to ~0.85 (x=1). - Shaded region spans ~0.25–0.35 at x=8, widening to ~0.70–0.95 at x=1. - Trend: Sharpest increase, with the highest F1(C) values across all hidden class counts. ### Key Observations - **Inverse Relationship**: F1(C) improves as the number of hidden classes decreases for all p-values. - **p-Value Impact**: Higher p-values (e.g., 0.99) consistently outperform lower p-values (e.g., 0.2) across all hidden class counts. - **Variability**: Shaded regions widen as hidden classes decrease, suggesting greater uncertainty at lower hidden class counts. - **Peak Performance**: At x=1 (1 hidden class), p=0.99 achieves ~0.85 F1(C), while p=0.2 achieves ~0.45. ### Interpretation The data suggests that model performance (F1(C)) improves with fewer hidden classes and higher certainty (p-value). The shaded regions indicate that higher p-values (e.g., 0.99) exhibit more stable performance, as their confidence intervals are narrower relative to their F1(C) values. The steepest gains occur when reducing hidden classes from 5 to 1, particularly for high-certainty models (p=0.99). This implies that simplifying the model (fewer hidden classes) and increasing certainty (higher p) synergistically enhance performance. The p=0.2 line’s lower performance and wider variability at x=1 highlight the importance of model confidence in achieving reliable results. </details> Figure 12: F1(C) with SL for $p=0.2,0.5$ and $0.9$ . classes lie among the labelled ones. In this ablation study, we show what happens if this assumption is violated. We run these experiments on the MNIST-EvenOdd dataset while picking different values of $p$ , i.e., for the lower-tail quantiles of the $\chi^{2}$ distributions. The F1(C) results obtained with SL for $p=0.2$ , $p=0.5$ and $p=0.99$ are reported in Figure 12 and those in terms of Acc(C) and Cls(C) in Appendix F. We clearly see that as the value of $p$ increases the network performs better and better. Interestingly, we register the biggest difference in performance with 4 hidden classes, i.e., when the impact of the unlabelled centroids is high, and the known concepts provide enough information to allow for a meaningful computation of the centroids of the unlabelled classes. 7 Related Work NeSy encompasses a diverse set of approaches that integrate symbolic reasoning with neural networks [36, 17, 12, 14]. A central challenge in this field lies in reconciling discrete, non-differentiable symbolic reasoning with the gradient-based optimization underlying neural networks. To enable end-to-end training, many NeSy approaches soften the semantics of logical reasoning via probabilistic [26, 51, 23, 32, 1, 47, 41, 25, 48, 9] or fuzzy logic frameworks [10, 11, 45, 2, 40]. A common strategy involves compiling background knowledge into the loss function to encourage constraint satisfaction during training [49, 13, 2], though this typically offers no guarantee that constraints will hold at inference time. In contrast, methods that restructure the model’s output space can ensure constraint satisfaction by design [26, 15, 1, 7, 33, 18, 16, 19, 43, 44]. Despite the many advances [24, 46], [28, 31] showed that most NeSy systems are prone to RSs. Some mitigation strategies have been proposed [27, 31], but they can be either costly or they might fail in challenging settings like those proposed in rs-bench. To obviate to such problems, an interesting alternative direction has been taken by [30], where the authors do not try to avoid the RSs problem, but rather inform the user of when the model is taking a shortcut and facilitates acquiring informative dense annotations for mitigation purposes. For a comprehensive overview over the RSs problem in NeSy see [29]. 8 Conclusion In this paper, we introduce Prototypical NeSy models as a novel strategy for achieving more accurate and robust NeSy learning under very limited supervision. In particular, we showed how to effectively avoid reasoning shortcuts by anchoring neural embeddings to prototypes, which allows to exploit a handful of labelled examples to train prototype-based concept representations, that then get continuously refined via the symbolic knowledge. We show the precise dynamics of the embedding update behind our models’ training and the difference with standard NeSy architectures. Moreover, we provide a theoretical analysis on the number of shortcuts possibly affecting our models. We validate them over a large set of experiments on the rsbench benchmark suite, where we show remarkable improvements, both in the synthetic tasks (MNIST-EvenOdd and Kand-Logic) and real-world high-stake ones (BDD-OIA). References - [1] Kareem Ahmed, Stefano Teso, Kai-Wei Chang, Guy Van den Broeck, and Antonio Vergari. Semantic probabilistic layers for neuro-symbolic learning. In Proceedings of NeurIPS, 2022. - [2] Samy Badreddine, Artur S. d’Avila Garcez, Luciano Serafini, and Michael Spranger. Logic tensor networks. Artificial Intelligence, 303, 2022. - [3] Arindam Banerjee, Srujana Merugu, Inderjit S. Dhillon, and Joydeep Ghosh. Clustering with bregman divergences. Journal of Machine Learning Research, 6(58), 2005. - [4] Pietro Barbiero, Gabriele Ciravegna, Francesco Giannini, Mateo Espinosa Zarlenga, Lucie Charlotte Magister, Alberto Tonda, Pietro Lio, Frédéric Precioso, Mateja Jamnik, and Giuseppe Marra. Interpretable neural-symbolic concept reasoning. In Proceedings of ICML, 2023. - [5] Samuele Bortolotti, Emanuele Marconato, Tommaso Carraro, Paolo Morettin, Emile van Krieken, Antonio Vergari, Stefano Teso, and Andrea Passerini. A neuro-symbolic benchmark suite for concept quality and reasoning shortcuts. In Proceedings of NeurIPS, 2024. - [6] Wang-Zhou Dai, Qiuling Xu, Yang Yu, and Zhi-Hua Zhou. Bridging machine learning and logical reasoning by abductive learning. In Proceedings of NeurIPS, 2019. - [7] Alessandro Daniele, Emile van Krieken, Luciano Serafini, and Frank van Harmelen. Refining neural network predictions using background knowledge. Machine Learning Journal, 2023. - [8] David Debot, Pietro Barbiero, Francesco Giannini, Gabriele Ciravegna, Michelangelo Diligenti, and Giuseppe Marra. Interpretable concept-based memory reasoning. In Proceedings of NeurIPS, 2024. - [9] David Debot, Gabriele Venturato, Giuseppe Marra, and Luc De Raedt. Neurosymbolic reinforcement learning: Playing minihack with probabilistic logic shields. In Toby Walsh, Julie Shah, and Zico Kolter, editors, Proceedings of AAAI, 2025. - [10] Michelangelo Diligenti, Marco Gori, Marco Maggini, and Leonardo Rigutini. Bridging logic and kernel machines. Machine Learning, 2012. - [11] Ivan Donadello, Luciano Serafini, and Artur S. d’Avila Garcez. Logic tensor networks for semantic image interpretation. In Proceedings of IJCAI, pages 1596–1602, 2017. - [12] Artur d’Avila Garcez and Luis C. Lamb. Neurosymbolic AI: The 3rd wave. Artificial Intelligence Review, 2023. - [13] Marc Fischer, Mislav Balunovic, Dana Drachsler-Cohen, Timon Gehr, Ce Zhang, and Martin Vechev. DL2: Training and querying neural networks with logic. In Proceedings of ICML, 2019. - [14] Eleonora Giunchiglia, Fergus Imrie, Mihaela van der Schaar, and Thomas Lukasiewicz. Machine Learning with Requirements: a Manifesto. Neurosymbolic AI Journal, 1, 2024. - [15] Eleonora Giunchiglia and Thomas Lukasiewicz. Coherent hierarchical multi-label classification networks. In Proceedings of NeurIPS, 2020. - [16] Eleonora Giunchiglia and Thomas Lukasiewicz. Multi-label classification neural networks with hard logical constraints. Journal of Artificial Intelligence Research, 72, 2021. - [17] Eleonora Giunchiglia, Mihaela Catalina Stoian, and Thomas Lukasiewicz. Deep learning with logical constraints. In Proceedings of IJCAI, 2022. - [18] Eleonora Giunchiglia, Alex Tatomir, Mihaela Catalina Stoian, and Thomas Lukasiewicz. CCN+: A neuro-symbolic framework for deep learning with requirements. International Journal of Approximate Reasoning, 171, 2024. - [19] Nicholas Hoernle, Rafael-Michael Karampatsis, Vaishak Belle, and Kobi Gal. MultiplexNet: Towards fully satisfied logical constraints in neural networks. In Proceedings of Association for the Advancement of Artificial Intelligence, 2022. - [20] Sergey Ioffe and Christian Szegedy. Batch normalization: Accelerating deep network training by reducing internal covariate shift. In Francis Bach and David Blei, editors, Proceedings of the 32nd International Conference on Machine Learning, volume 37 of Proceedings of Machine Learning Research, pages 448–456, Lille, France, 07–09 Jul 2015. PMLR. - [21] Rahima Khanam and Muhammad Hussain. Yolov11: An overview of the key architectural enhancements, 2024. - [22] Diederik P. Kingma and Jimmy Ba. Adam: A method for stochastic optimization. In Proceedings of International Conference on Learning Representations, 2015. - [23] Luca Di Liello, Pierfrancesco Ardino, Jacopo Gobbi, Paolo Morettin, Stefano Teso, and Andrea Passerini. Efficient generation of structured objects with constrained adversarial networks. In Proceedings of NeurIPS, 2020. - [24] Jaron Maene, Vincent Derkinderen, and Pedro Zuidberg Dos Martires. Klay: Accelerating arithmetic circuits for neurosymbolic AI. In The Thirteenth International Conference on Learning Representations, ICLR 2025, Singapore, April 24-28, 2025, 2025. - [25] Jaron Maene, Vincent Derkinderen, and Luc De Raedt. On the hardness of probabilistic neurosymbolic learning. In Forty-first International Conference on Machine Learning, ICML 2024, Vienna, Austria, July 21-27, 2024. OpenReview.net, 2024. - [26] Robin Manhaeve, Sebastijan Dumancic, Angelika Kimmig, Thomas Demeester, and Luc De Raedt. DeepProbLog: Neural probabilistic logic programming. In Proceedings of NeurIPS, 2018. - [27] Robin Manhaeve, Sebastijan Dumancic, Angelika Kimmig, Thomas Demeester, and Luc De Raedt. Neural probabilistic logic programming in deepproblog. Artificial Intelligence, 2021. - [28] Emanuele Marconato, Gianpaolo Bontempo, Elisa Ficarra, Simone Calderara, Andrea Passerini, and Stefano Teso. Neuro-symbolic continual learning: Knowledge, reasoning shortcuts and concept rehearsal. In Proceedings of ICML, 2023. - [29] Emanuele Marconato, Samuele Bortolotti, Emile van Krieken, Paolo Morettin, Elena Umili, Antonio Vergari, Efthymia Tsamoura, Andrea Passerini, and Stefano Teso. Symbol grounding in neuro-symbolic ai: A gentle introduction to reasoning shortcuts, 2025. - [30] Emanuele Marconato, Samuele Bortolotti, Emile van Krieken, Antonio Vergari, Andrea Passerini, and Stefano Teso. BEARS make neuro-symbolic models aware of their reasoning shortcuts. In Proceedings of UAI, 2024. - [31] Emanuele Marconato, Stefano Teso, Antonio Vergari, and Andrea Passerini. Not all neuro-symbolic concepts are created equal: Analysis and mitigation of reasoning shortcuts. In Proceedings of NeurIPS, 2023. - [32] Giuseppe Marra and Ondrej Kuzelka. Neural markov logic networks. In Proceedings of UAI, 2021. - [33] Eleonora Misino, Giuseppe Marra, and Emanuele Sansone. VAEL: Bridging Variational Autoencoders and Probabilistic Logic Programming. In Proceedings of NeurIPS, 2022. - [34] Heimo Müller and Andreas Holzinger. Kandinsky patterns. Artificial Intelligence, 300:103546, 2021. - [35] Connor Pryor, Charles Dickens, Eriq Augustine, Alon Albalak, William Yang Wang, and Lise Getoor. Neupsl: Neural probabilistic soft logic. In Proceedings of IJCAI, 2023. - [36] Luc De Raedt, Sebastijan Dumancic, Robin Manhaeve, and Giuseppe Marra. From statistical relational to neuro-symbolic artificial intelligence. In Proceedings of IJCAI, 2020. - [37] Joseph Redmon, Santosh Divvala, Ross Girshick, and Ali Farhadi. You only look once unified, real-time object detection. In Proceedings IEEE CVPR, 2016. - [38] Shaoqing Ren, Kaiming He, Ross Girshick, and Jian Sun. Faster r-cnn: Towards real-time object detection with region proposal networks. In C. Cortes, N. Lawrence, D. Lee, M. Sugiyama, and R. Garnett, editors, Advances in Neural Information Processing Systems, volume 28. Curran Associates, Inc., 2015. - [39] Yoshihide Sawada and Keigo Nakamura. Concept bottleneck model with additional unsupervised concepts. IEEE Access, 10:1–1, 01 2022. - [40] Davide Scassola, Sebastiano Saccani, Ginevra Carbone, and Luca Bortolussi. Zero-shot conditioning of score-based diffusion models by neuro-symbolic constraints, 2024. - [41] Arseny Skryagin, Daniel Ochs, Devendra Singh Dhami, and Kristian Kersting. Scalable neural-probabilistic answer set programming. Journal of Artificial Intelligence Research, 2023. - [42] Jake Snell, Kevin Swersky, and Richard Zemel. Prototypical networks for few-shot learning. In Proceedings of NeurIPS, 2017. - [43] Mihaela C. Stoian, Salijona Dyrmishi, Maxime Cordy, Thomas Lukasiewicz, and Eleonora Giunchiglia. How Realistic Is Your Synthetic Data? Constraining Deep Generative Models for Tabular Data. In Proceedings of International Conference on Learning Representations, 2024. - [44] Mihaela Catalina Stoian and Eleonora Giunchiglia. Beyond the convexity assumption: Realistic tabular data generation under quantifier-free real linear constraints. In Proceedings of ICLR, 2025. - [45] Emile van Krieken, Erman Acar, and Frank van Harmelen. Analyzing differentiable fuzzy implications. In Proceedings of KR, 2020. - [46] Emile van Krieken, Pasquale Minervini, Edoardo Ponti, and Antonio Vergari. Neurosymbolic diffusion models, 2025. - [47] Emile van Krieken, Thiviyan Thanapalasingam, Jakub M. Tomczak, Frank Van Harmelen, and Annette Ten Teije. A-neSI: A scalable approximate method for probabilistic neurosymbolic inference. In Proceedings of NeurIPS, 2023. - [48] Victor Verreet, Lennert De Smet, Luc De Raedt, and Emanuele Sansone. Explain, agree, LEARN: scaling learning for neural probabilistic logic. In Ulle Endriss, Francisco S. Melo, Kerstin Bach, Alberto José Bugarín Diz, Jose Maria Alonso-Moral, Senén Barro, and Fredrik Heintz, editors, ECAI 2024 - 27th European Conference on Artificial Intelligence, 19-24 October 2024, Santiago de Compostela, Spain - Including 13th Conference on Prestigious Applications of Intelligent Systems (PAIS 2024), volume 392 of Frontiers in Artificial Intelligence and Applications, pages 1349–1356. IOS Press, 2024. - [49] Jingyi Xu, Zilu Zhang, Tal Friedman, Yitao Liang, and Guy Van den Broeck. A semantic loss function for deep learning with symbolic knowledge. In Proceedings of ICML, 2018. - [50] Yiran Xu, Xiaoyin Yang, Lihang Gong, Hsuan-Chu Lin, Tz-Ying Wu, Yunsheng Li, and Nuno Vasconcelos. Explainable object-induced action decision for autonomous vehicles. In IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR), June 2020. - [51] Zhun Yang, Adam Ishay, and Joohyung Lee. Neurasp: Embracing neural networks into answer set programming. In Proceedings of IJCAI, 2020. - [52] Fisher Yu, Haofeng Chen, Xin Wang, Wenqi Xian, Yingying Chen, Fangchen Liu, Vashisht Madhavan, and Trevor Darrell. Bdd100k: A diverse driving dataset for heterogeneous multitask learning. 2020 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR), pages 2633–2642, 2018. NeurIPS Paper Checklist 1. Claims 1. Question: Do the main claims made in the abstract and introduction accurately reflect the paper’s contributions and scope? 1. Answer: [Yes] 1. Justification: The abstract and/or introduction clearly state the claims made, including the contributions made in the paper and important assumptions. 1. Guidelines: - The answer NA means that the abstract and introduction do not include the claims made in the paper. - The abstract and/or introduction should clearly state the claims made, including the contributions made in the paper and important assumptions and limitations. A No or NA answer to this question will not be perceived well by the reviewers. - The claims made should match theoretical and experimental results, and reflect how much the results can be expected to generalize to other settings. - It is fine to include aspirational goals as motivation as long as it is clear that these goals are not attained by the paper. 1. Limitations 1. Question: Does the paper discuss the limitations of the work performed by the authors? 1. Answer: [Yes] 1. Justification: We have clearly shown what happens when more and more classes are unlabelled in Section 6 and Figure 12(a). 1. Guidelines: - The answer NA means that the paper has no limitation while the answer No means that the paper has limitations, but those are not discussed in the paper. - The authors are encouraged to create a separate "Limitations" section in their paper. - The paper should point out any strong assumptions and how robust the results are to violations of these assumptions (e.g., independence assumptions, noiseless settings, model well-specification, asymptotic approximations only holding locally). The authors should reflect on how these assumptions might be violated in practice and what the implications would be. - The authors should reflect on the scope of the claims made, e.g., if the approach was only tested on a few datasets or with a few runs. In general, empirical results often depend on implicit assumptions, which should be articulated. - The authors should reflect on the factors that influence the performance of the approach. For example, a facial recognition algorithm may perform poorly when image resolution is low or images are taken in low lighting. Or a speech-to-text system might not be used reliably to provide closed captions for online lectures because it fails to handle technical jargon. - The authors should discuss the computational efficiency of the proposed algorithms and how they scale with dataset size. - If applicable, the authors should discuss possible limitations of their approach to address problems of privacy and fairness. - While the authors might fear that complete honesty about limitations might be used by reviewers as grounds for rejection, a worse outcome might be that reviewers discover limitations that aren’t acknowledged in the paper. The authors should use their best judgment and recognize that individual actions in favor of transparency play an important role in developing norms that preserve the integrity of the community. Reviewers will be specifically instructed to not penalize honesty concerning limitations. 1. Theory Assumptions and Proofs 1. Question: For each theoretical result, does the paper provide the full set of assumptions and a complete (and correct) proof? 1. Answer: [Yes] 1. Justification: We have included the proofs of our Theorem 4.1, Corollary 4.2 and Proposition 5.1 in Appendix A, B and C respectively. We could not provide a sketch of the solution in the main paper due to space constraints. 1. Guidelines: - The answer NA means that the paper does not include theoretical results. - All the theorems, formulas, and proofs in the paper should be numbered and cross-referenced. - All assumptions should be clearly stated or referenced in the statement of any theorems. - The proofs can either appear in the main paper or the supplemental material, but if they appear in the supplemental material, the authors are encouraged to provide a short proof sketch to provide intuition. - Inversely, any informal proof provided in the core of the paper should be complemented by formal proofs provided in appendix or supplemental material. - Theorems and Lemmas that the proof relies upon should be properly referenced. 1. Experimental Result Reproducibility 1. Question: Does the paper fully disclose all the information needed to reproduce the main experimental results of the paper to the extent that it affects the main claims and/or conclusions of the paper (regardless of whether the code and data are provided or not)? 1. Answer: [Yes] 1. Justification: We provide a detailed description of our method in Section 3, the description of the metrics, baseline and datasets in Section 6 and all the remaining details (e.g., hyperparameters) in Appendix D, E and F. 1. Guidelines: - The answer NA means that the paper does not include experiments. - If the paper includes experiments, a No answer to this question will not be perceived well by the reviewers: Making the paper reproducible is important, regardless of whether the code and data are provided or not. - If the contribution is a dataset and/or model, the authors should describe the steps taken to make their results reproducible or verifiable. - Depending on the contribution, reproducibility can be accomplished in various ways. For example, if the contribution is a novel architecture, describing the architecture fully might suffice, or if the contribution is a specific model and empirical evaluation, it may be necessary to either make it possible for others to replicate the model with the same dataset, or provide access to the model. In general. releasing code and data is often one good way to accomplish this, but reproducibility can also be provided via detailed instructions for how to replicate the results, access to a hosted model (e.g., in the case of a large language model), releasing of a model checkpoint, or other means that are appropriate to the research performed. - While NeurIPS does not require releasing code, the conference does require all submissions to provide some reasonable avenue for reproducibility, which may depend on the nature of the contribution. For example 1. If the contribution is primarily a new algorithm, the paper should make it clear how to reproduce that algorithm. 1. If the contribution is primarily a new model architecture, the paper should describe the architecture clearly and fully. 1. If the contribution is a new model (e.g., a large language model), then there should either be a way to access this model for reproducing the results or a way to reproduce the model (e.g., with an open-source dataset or instructions for how to construct the dataset). 1. We recognize that reproducibility may be tricky in some cases, in which case authors are welcome to describe the particular way they provide for reproducibility. In the case of closed-source models, it may be that access to the model is limited in some way (e.g., to registered users), but it should be possible for other researchers to have some path to reproducing or verifying the results. 1. Open access to data and code 1. Question: Does the paper provide open access to the data and code, with sufficient instructions to faithfully reproduce the main experimental results, as described in supplemental material? 1. Answer: [Yes] 1. Justification: The code is publicly available at the following Github repository including detailed instructions for reproducing the experimental results. 1. Guidelines: - The answer NA means that paper does not include experiments requiring code. - Please see the NeurIPS code and data submission guidelines (https://nips.cc/public/guides/CodeSubmissionPolicy) for more details. - While we encourage the release of code and data, we understand that this might not be possible, so “No” is an acceptable answer. Papers cannot be rejected simply for not including code, unless this is central to the contribution (e.g., for a new open-source benchmark). - The instructions should contain the exact command and environment needed to run to reproduce the results. See the NeurIPS code and data submission guidelines (https://nips.cc/public/guides/CodeSubmissionPolicy) for more details. - The authors should provide instructions on data access and preparation, including how to access the raw data, preprocessed data, intermediate data, and generated data, etc. - The authors should provide scripts to reproduce all experimental results for the new proposed method and baselines. If only a subset of experiments are reproducible, they should state which ones are omitted from the script and why. - At submission time, to preserve anonymity, the authors should release anonymized versions (if applicable). - Providing as much information as possible in supplemental material (appended to the paper) is recommended, but including URLs to data and code is permitted. 1. Experimental Setting/Details 1. Question: Does the paper specify all the training and test details (e.g., data splits, hyperparameters, how they were chosen, type of optimizer, etc.) necessary to understand the results? 1. Answer: [Yes] 1. Justification: All the relevant details pertaining our experimental analysis are given in Appendix E. 1. Guidelines: - The answer NA means that the paper does not include experiments. - The experimental setting should be presented in the core of the paper to a level of detail that is necessary to appreciate the results and make sense of them. - The full details can be provided either with the code, in appendix, or as supplemental material. 1. Experiment Statistical Significance 1. Question: Does the paper report error bars suitably and correctly defined or other appropriate information about the statistical significance of the experiments? 1. Answer: [Yes] 1. Justification: We report the error bars in all the tables and charts present in our paper. 1. Guidelines: - The answer NA means that the paper does not include experiments. - The authors should answer "Yes" if the results are accompanied by error bars, confidence intervals, or statistical significance tests, at least for the experiments that support the main claims of the paper. - The factors of variability that the error bars are capturing should be clearly stated (for example, train/test split, initialization, random drawing of some parameter, or overall run with given experimental conditions). - The method for calculating the error bars should be explained (closed form formula, call to a library function, bootstrap, etc.) - The assumptions made should be given (e.g., Normally distributed errors). - It should be clear whether the error bar is the standard deviation or the standard error of the mean. - It is OK to report 1-sigma error bars, but one should state it. The authors should preferably report a 2-sigma error bar than state that they have a 96% CI, if the hypothesis of Normality of errors is not verified. - For asymmetric distributions, the authors should be careful not to show in tables or figures symmetric error bars that would yield results that are out of range (e.g. negative error rates). - If error bars are reported in tables or plots, The authors should explain in the text how they were calculated and reference the corresponding figures or tables in the text. 1. Experiments Compute Resources 1. Question: For each experiment, does the paper provide sufficient information on the computer resources (type of compute workers, memory, time of execution) needed to reproduce the experiments? 1. Answer: [Yes] 1. Justification: We included the details of the compute infrastructure we used in our experiment in Appendix E. 1. Guidelines: - The answer NA means that the paper does not include experiments. - The paper should indicate the type of compute workers CPU or GPU, internal cluster, or cloud provider, including relevant memory and storage. - The paper should provide the amount of compute required for each of the individual experimental runs as well as estimate the total compute. - The paper should disclose whether the full research project required more compute than the experiments reported in the paper (e.g., preliminary or failed experiments that didn’t make it into the paper). 1. Code Of Ethics 1. Question: Does the research conducted in the paper conform, in every respect, with the NeurIPS Code of Ethics https://neurips.cc/public/EthicsGuidelines? 1. Answer: [Yes] 1. Justification: We reviewed the NeurIPS Code of Ethics and comply with it. 1. Guidelines: - The answer NA means that the authors have not reviewed the NeurIPS Code of Ethics. - If the authors answer No, they should explain the special circumstances that require a deviation from the Code of Ethics. - The authors should make sure to preserve anonymity (e.g., if there is a special consideration due to laws or regulations in their jurisdiction). 1. Broader Impacts 1. Question: Does the paper discuss both potential positive societal impacts and negative societal impacts of the work performed? 1. Answer: [N/A] 1. Justification: The paper presents a mitigation strategy for the reasoning shortcut problem, as such it does not have any immediate and direct societal impact. 1. Guidelines: - The answer NA means that there is no societal impact of the work performed. - If the authors answer NA or No, they should explain why their work has no societal impact or why the paper does not address societal impact. - Examples of negative societal impacts include potential malicious or unintended uses (e.g., disinformation, generating fake profiles, surveillance), fairness considerations (e.g., deployment of technologies that could make decisions that unfairly impact specific groups), privacy considerations, and security considerations. - The conference expects that many papers will be foundational research and not tied to particular applications, let alone deployments. However, if there is a direct path to any negative applications, the authors should point it out. For example, it is legitimate to point out that an improvement in the quality of generative models could be used to generate deepfakes for disinformation. On the other hand, it is not needed to point out that a generic algorithm for optimizing neural networks could enable people to train models that generate Deepfakes faster. - The authors should consider possible harms that could arise when the technology is being used as intended and functioning correctly, harms that could arise when the technology is being used as intended but gives incorrect results, and harms following from (intentional or unintentional) misuse of the technology. - If there are negative societal impacts, the authors could also discuss possible mitigation strategies (e.g., gated release of models, providing defenses in addition to attacks, mechanisms for monitoring misuse, mechanisms to monitor how a system learns from feedback over time, improving the efficiency and accessibility of ML). 1. Safeguards 1. Question: Does the paper describe safeguards that have been put in place for responsible release of data or models that have a high risk for misuse (e.g., pretrained language models, image generators, or scraped datasets)? 1. Answer: [N/A] 1. Justification: The paper propose a method that does not present any particular risk of misuse. 1. Guidelines: - The answer NA means that the paper poses no such risks. - Released models that have a high risk for misuse or dual-use should be released with necessary safeguards to allow for controlled use of the model, for example by requiring that users adhere to usage guidelines or restrictions to access the model or implementing safety filters. - Datasets that have been scraped from the Internet could pose safety risks. The authors should describe how they avoided releasing unsafe images. - We recognize that providing effective safeguards is challenging, and many papers do not require this, but we encourage authors to take this into account and make a best faith effort. 1. Licenses for existing assets 1. Question: Are the creators or original owners of assets (e.g., code, data, models), used in the paper, properly credited and are the license and terms of use explicitly mentioned and properly respected? 1. Answer: [Yes] 1. Justification: For our work we built upon the code and datasets taken from rs-bench [5]. The work has been properly credited, and the URL to the github repository together with the name of the licence is given in Appendix D. 1. Guidelines: - The answer NA means that the paper does not use existing assets. - The authors should cite the original paper that produced the code package or dataset. - The authors should state which version of the asset is used and, if possible, include a URL. - The name of the license (e.g., CC-BY 4.0) should be included for each asset. - For scraped data from a particular source (e.g., website), the copyright and terms of service of that source should be provided. - If assets are released, the license, copyright information, and terms of use in the package should be provided. For popular datasets, paperswithcode.com/datasets has curated licenses for some datasets. Their licensing guide can help determine the license of a dataset. - For existing datasets that are re-packaged, both the original license and the license of the derived asset (if it has changed) should be provided. - If this information is not available online, the authors are encouraged to reach out to the asset’s creators. 1. New Assets 1. Question: Are new assets introduced in the paper well documented and is the documentation provided alongside the assets? 1. Answer: [Yes] 1. Justification: We made the code publicly available and detailed all the necessary documentation relative to it. 1. Guidelines: - The answer NA means that the paper does not release new assets. - Researchers should communicate the details of the dataset/code/model as part of their submissions via structured templates. This includes details about training, license, limitations, etc. - The paper should discuss whether and how consent was obtained from people whose asset is used. - At submission time, remember to anonymize your assets (if applicable). You can either create an anonymized URL or include an anonymized zip file. 1. Crowdsourcing and Research with Human Subjects 1. Question: For crowdsourcing experiments and research with human subjects, does the paper include the full text of instructions given to participants and screenshots, if applicable, as well as details about compensation (if any)? 1. Answer: [N/A] 1. Justification: The paper does not involve crowdsourcing nor research with human subjects. 1. Guidelines: - The answer NA means that the paper does not involve crowdsourcing nor research with human subjects. - Including this information in the supplemental material is fine, but if the main contribution of the paper involves human subjects, then as much detail as possible should be included in the main paper. - According to the NeurIPS Code of Ethics, workers involved in data collection, curation, or other labor should be paid at least the minimum wage in the country of the data collector. 1. Institutional Review Board (IRB) Approvals or Equivalent for Research with Human Subjects 1. Question: Does the paper describe potential risks incurred by study participants, whether such risks were disclosed to the subjects, and whether Institutional Review Board (IRB) approvals (or an equivalent approval/review based on the requirements of your country or institution) were obtained? 1. Answer: [N/A] 1. Justification: The paper does not involve crowdsourcing nor research with human subjects. 1. Guidelines: - The answer NA means that the paper does not involve crowdsourcing nor research with human subjects. - Depending on the country in which research is conducted, IRB approval (or equivalent) may be required for any human subjects research. If you obtained IRB approval, you should clearly state this in the paper. - We recognize that the procedures for this may vary significantly between institutions and locations, and we expect authors to adhere to the NeurIPS Code of Ethics and the guidelines for their institution. - For initial submissions, do not include any information that would break anonymity (if applicable), such as the institution conducting the review. 1. Declaration of LLM usage 1. Question: Does the paper describe the usage of LLMs if it is an important, original, or non-standard component of the core methods in this research? Note that if the LLM is used only for writing, editing, or formatting purposes and does not impact the core methodology, scientific rigorousness, or originality of the research, declaration is not required. 1. Answer: [N/A] 1. Justification: The core method development in this research does not involve LLMs as any important, original, or non-standard components. 1. Guidelines: - The answer NA means that the core method development in this research does not involve LLMs as any important, original, or non-standard components. - Please refer to our LLM policy (https://neurips.cc/Conferences/2025/LLM) for what should or should not be described. Appendix A Proof Theorem 4.1 Statement. Let $\mathbf{y}$ be the output of a prototypical NeSy predictor reasoning over the knowledge K and the set of concepts $\mathcal{C}=[h_{1}]×...×[h_{k}]$ . If the predictor is trained using $\mathcal{L}^{\text{\rm{NeSy}}}(\mathbf{y},\textsc{K})$ , then for every $i∈[k]$ the error calculated with respect to the embedding $\mathbf{z}_{i}$ is equal to: $$ \nabla_{\mathbf{z}_{i}}\mathcal{L}^{\text{\rm{NeSy}}}(\mathbf{y},\textsc{K})=2\sum_{c\in[h_{i}]}\frac{\partial\mathcal{L}^{\text{\rm{NeSy}}}}{\partial y_{c}}y_{c}\Big(\mathbf{c}_{c}-\sum_{c^{\prime}\in[h_{i}]}y_{c^{\prime}}\mathbf{c}_{c^{\prime}}\Big). \tag{10} $$ Proof. Let us apply the chain rule. For every $i∈[k]$ : | | $\displaystyle∇_{\mathbf{z}_{i}}\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})=$ | $\displaystyle\sum_{c∈[h_{i}]}\frac{∂\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})}{∂ y_{c}}∇_{\mathbf{z}_{i}}y_{c}$ | | | --- | --- | --- | --- | $$ \nabla_{\mathbf{z}_{i}}y_{c}=\nabla_{\mathbf{z}_{i}}\left(\frac{\exp(-||\mathbf{z}_{i}-\mathbf{c}_{c}||^{2}_{2})}{\sum_{c^{\prime}\in[h_{i}]}\exp(-||\mathbf{z}_{i}-\mathbf{c}_{c^{\prime}}||^{2}_{2})}\right) $$ In order to ease the calculations, we calculate the partial derivative of $y_{c}$ with respect to the $j$ th element of the embedding $\mathbf{z}_{i}$ , which we will refer to as $z_{i}^{j}$ . Let $d_{c}=-||\mathbf{z}_{i}-\mathbf{c}_{c}||^{2}_{2}$ then: | | $\displaystyle\frac{∂ y_{c}}{∂{z_{i}^{j}}}=$ | $\displaystyle\sum_{c^{\prime}∈[h_{i}]}\frac{∂ y_{c}}{∂ d_{c}}\frac{∂ d_{c}}{∂ z_{i}^{j}}$ | | | --- | --- | --- | --- | Since $\frac{∂ d_{c}}{∂ z_{i}^{j}}=-2(z_{i}^{j}-e_{c}^{j})$ , $e_{c}^{j}$ being the $j$ th element of the vector $\mathbf{c}_{c}$ , then | | $\displaystyle\frac{∂ y_{c}}{∂{z_{i}^{j}}}=$ | $\displaystyle\;y_{c}\left[(1-y_{c})(-2(z_{i}^{j}-e_{c}^{j}))-\sum_{c^{\prime}∈[h_{i}],c^{\prime}\not=c}y_{c^{\prime}}(-2(z_{i}^{j}-e_{c^{\prime}}^{j}))\right]$ | | | --- | --- | --- | --- | We can hence conclude: $$ \nabla_{\mathbf{z}_{i}}\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})=2\sum_{c\in[h_{i}]}\frac{\partial\mathcal{L}^{\text{NeSy}}}{\partial y_{c}}y_{c}\Big(\mathbf{c}_{c}-\sum_{c^{\prime}\in[h_{i}]}y_{c^{\prime}}\mathbf{c}_{c^{\prime}}\Big). $$ $\square$ Appendix B Proof Corollary 4.2 Statement. Let $\mathbf{y}$ be the output of a prototypical NeSy predictor reasoning over the knowledge K and the set of concepts $\mathcal{C}=[h_{1}]×...×[h_{k}]$ . If the predictor is trained using semantic loss $\mathcal{L}^{\text{\rm{NeSy}}}(\mathbf{y},\textsc{K})$ as defined in Equation 7, then for every $i∈[k]$ the error calculated with respect to the embedding $\mathbf{z}_{i}$ is equal to: $$ \nabla_{\mathbf{z}_{i}}\mathcal{L}^{\text{\rm{NeSy}}}(\mathbf{y},\textsc{K})=2\sum_{c\in[h_{i}]}\Big[\frac{y_{c}-\mathbb{E}[Y_{c}\mid\mathbf{y},\nu\models\textsc{K}]}{y_{c}(1-y_{c})}\Big]y_{c}(\mathbf{c}_{c}-\sum_{c^{\prime}}\mathbf{c}_{c^{\prime}}y_{c^{\prime}}). \tag{11} $$ Proof. Recall that the semantic loss is defined as: $$ \mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})=-\log\sum_{\nu\models\textsc{K}}\prod_{c\in\bigcup_{i}{[h_{i}]}}(y_{c})^{\nu(c)}(1-y_{c})^{1-\nu(c)}, $$ where each $\nu:\bigcup_{i}{[h_{i}]}→\{0,1\}$ represents a boolean assignment of the variables in $\bigcup_{i}{[h_{i}]}$ . Given Theorem 4.1, to prove our statement, we need to calculate the value of $\frac{∂\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})}{∂ y_{c}}$ : | | | $\displaystyle\frac{∂\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})}{∂ y_{c}}$ | $\displaystyle=-\frac{\sum\limits_{\nu\models\textsc{K}}\prod\limits_{{c^{\prime}∈\bigcup_{i}{[h_{i}]},{c^{\prime}\not=c}}}(y_{c^{\prime}})^{\nu({c^{\prime}})}(1-y_{c^{\prime}})^{1-\nu({c^{\prime}})}\frac{∂}{∂ y_{c}}\Big((y_{c})^{\nu(c)}(1-y_{c})^{1-\nu(c)}\Big)}{\sum\limits_{\nu\models\textsc{K}}\prod\limits_{c∈\bigcup_{i}{[h_{i}]}}(y_{c})^{\nu(c)}(1-y_{c})^{1-\nu(c)}}$ | | | --- | --- | --- | --- | --- | where | | $\displaystyle\frac{∂}{∂ y_{c}}\Big((y_{c})^{\nu(c)}(1-y_{c})^{1-\nu(c)}\Big)$ | $\displaystyle=(1-y_{c})^{1-\nu(c)}(y_{c})^{\nu(c)}\Big(\frac{\nu(c)}{y_{c}}-\frac{1-\nu(c)}{1-y_{c}}\Big)$ | | | --- | --- | --- | --- | Substituting we obtain: | | | $\displaystyle\frac{∂\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})}{∂ y_{c}}$ | $\displaystyle=-\frac{\sum\limits_{\nu\models\textsc{K}}\prod\limits_{{{c^{\prime}∈\bigcup_{i}[h_{i}]}}}(y_{c^{\prime}})^{\nu({c^{\prime}})}(1-y_{c^{\prime}})^{1-\nu({c^{\prime}})}\left(\frac{\nu(c)-y_{c}}{y_{c}(1-y_{c})}\right)}{\sum\limits_{\nu\models\textsc{K}}\prod\limits_{c_{∈}\bigcup_{i}[h_{i}]}(y_{c})^{\nu(c)}(1-y_{c})^{1-\nu(c)}}$ | | | --- | --- | --- | --- | --- | Since each concept $c∈\bigcup_{i}[h_{i}]$ corresponds to an independent random event whose truth assignment is modelled by a Bernoulli random variable $Y_{c}\sim\text{Bernoulli}(y_{c})$ , the joint probability distribution over assignments $\nu:\bigcup_{i}[h_{i}]→\{0,1\}$ factorizes as: $$ p(\nu\mid\mathbf{y})=\prod_{c\in\bigcup_{i}[h_{i}]}\left(y_{c}\right)^{\nu(c)}\left(1-y_{c}\right)^{1-\nu(c)}. $$ This allows us to compute the expected value of each $Y_{c}$ conditioned on the satisfaction of K as: $$ \mathbb{E}[Y_{c}\mid\mathbf{y},\nu\models\textsc{K}]=\frac{\sum_{\nu\models\textsc{K}}p(\nu\mid\mathbf{y})\cdot\nu(c)}{\sum_{\nu\models\textsc{K}}p(\nu\mid\mathbf{y})}. $$ We can rewrite the error calculated with respect to the output for the class $c$ as: $$ \frac{\partial\mathcal{L}^{\text{NeSy}}(\mathbf{y},\textsc{K})}{\partial y_{c}}=\frac{y_{c}-\mathbb{E}[Y_{c}\mid\nu\models\textsc{K},\mathbf{y}]}{y_{c}(1-y_{c})}. $$ The statement thus follows. $\square$ Appendix C Proof of Proposition 5.1 Statement Consider a prototypical NeSy predictor inducing $p_{\theta}(\mathbf{Y}|\mathbf{X};\textsc{K})$ . Assume $\mathcal{G}=$ $[h_{1}]×...×[h_{k}]$ and let $\mathcal{H}_{i}⊂eq[h_{i}]$ be the set of concepts with at least one labelled datapoint from a dataset $\mathcal{D}$ . Under [A1,2,3] the number of deterministic optima for $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ is $$ \sum_{\alpha\in\mathcal{A}}\text{1}\Big(\bigwedge_{\mathbf{g}\in\mathrm{supp(\mathbf{G})}}\Big(\bigwedge_{i\in[k]}\bigwedge_{g_{j}\in\mathcal{H}_{i}}(\alpha(\mathbf{g})_{i}=g_{i}\wedge g_{i}=g_{j})\Big)\wedge\Big((\beta_{\textsc{K}}\circ\alpha)(\mathbf{g})=\beta_{\textsc{K}}(\mathbf{g})\Big)\Big), $$ $\alpha$ being the mapping induced by $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ and $\mathcal{A}$ being the set of all possible mappings $\alpha$ . Proof. We assume that: 1. the distribution $p^{*}(\mathbf{X}\mid\mathbf{G},\mathbf{S})$ is induced by a map $\phi\colon(\mathbf{g},\mathbf{s})\mapsto\mathbf{x}$ , where $\phi$ is invertible and smooth over $\mathbf{s}$ ; 1. the distribution $p^{*}(\mathbf{Y}\mid\mathbf{G};\textsc{K})$ is induced by a deterministic mapping $\beta_{\textsc{K}}\colon\mathbf{g}→\mathbf{y}$ and $p^{*}(\mathbf{y}\mid\mathbf{g};\textsc{K})=0,$ for all $(\mathbf{g},\mathbf{y})$ not compliant with K; 1. given a bijective assignment $\sigma:\mathcal{G}→\mathcal{G}$ such that $\sigma(\mathbf{g})_{i}∈[h_{i}]$ with $i=1,...,k$ , it holds that for every datapoint $\mathbf{x}=\phi(\mathbf{g},\mathbf{s})$ , $\text{argmin}_{j∈[h_{i}]}||f_{\theta}^{i}(\mathbf{x})-\mathbf{c}_{j}||_{2}^{2}=\sigma(\mathbf{g})_{i}.$ Under [A1], the data distribution is induced by a smooth, invertible map $\phi:(\mathbf{g},\mathbf{s})\mapsto\mathbf{x}$ , so every datapoint can be written as $\mathbf{x}=\phi(\mathbf{g},\mathbf{s})$ . Under [A1] and [A3], any deterministic predictor $p_{\theta}(\mathbf{C}\mid\mathbf{X})$ that is constant over the support of $p(\mathbf{X}\mid\mathbf{g})$ corresponds uniquely to a deterministic mapping $\alpha:\mathcal{G}\!→\!\mathcal{G}$ , defined by $\alpha(\mathbf{g})=\sigma(\mathbf{g})$ . Conversely, each $\alpha$ induces a deterministic distribution $p_{\theta}(\mathbf{C}\mid\mathbf{X})$ ; thus, it suffices to characterize the possible assignments $\alpha∈\mathcal{A}$ given the available supervisions in $\mathcal{D}$ . We now proceed to characterise the number of deterministic optima. For any $i∈[k]$ and supervised label $g_{j}∈\mathcal{H}_{i}$ the cross-entropy loss wrt. the concepts is maximised if and only if $p_{\theta}(C_{i}=g_{j}\mid\mathbf{g})=1$ , which corresponds to a deterministic mapping $\alpha(\mathbf{g})_{i}=g_{j}$ . Hence, given $i∈[k]$ for all the deterministic optima it must hold: $$ \textstyle\bigwedge_{g_{j}\in\mathcal{H}_{i}}(\alpha_{i}(\mathbf{g})=g_{i}\wedge g_{i}=g_{j}). $$ When accounting for all the $\mathcal{H}_{i}$ and $i∈[k]$ , we obtain: $$ \textstyle\bigwedge_{\mathbf{g}\in\mathrm{supp(\mathbf{G})}}\;\bigwedge_{i\in[k]}\bigwedge_{g_{j}\in\mathcal{H}_{i}}(\alpha_{i}(\mathbf{g})=g_{i}\wedge g_{i}=g_{j}). $$ Under [A2], a NeSy predictor achieves zero NeSy loss wrt. the final label if and only if it is compliant with K, then it must hold: $$ \textstyle(\beta_{\textsc{K}}\circ\alpha)(\mathbf{g})=\beta_{\textsc{K}}(\mathbf{g}) $$ Hence, under [A1,2,3] the number of deterministic optima for $p_{\theta}(\mathbf{C}\mid\mathbf{G})$ is $$ \sum_{\alpha\in\mathcal{A}}\text{1}\Big(\bigwedge_{\mathbf{g}\in\mathrm{supp(\mathbf{G})}}\Big(\bigwedge_{i\in[k]}\bigwedge_{g_{j}\in\mathcal{H}_{i}}(\alpha(\mathbf{g})_{i}=g_{i}\wedge g_{i}=g_{j})\Big)\wedge\Big((\beta_{\textsc{K}}\circ\alpha)(\mathbf{g})=\beta_{\textsc{K}}(\mathbf{g})\Big)\Big). $$ $\square$ Appendix D Tasks Details The tasks belong to the rs-bench Link: https://github.com/unitn-sml/rsbench-code benchmark suite. In this benchmark, all ready-made data sets and generated datasets are distributed under the CC-BY-SA 4.0 license, with the exception of Kand-Logic, which is derived from Kandinsky-patterns [34] and as such is distributed under the GPL-3.0 license. Regarding the code, most of the code in the repo is distributed under the BSD 3 license, with the exception of Kand-Logic, which is derived from Kandinsky-patterns and as such is distributed under the GPL-3.0 license. MNIST-EvenOdd [28, 30] The dataset presents a more complex version of the standard MNIST-Addition task. Each input is a pair of handwritten $28× 28$ digits labelled with their sum (background knowledge). The goal is to correctly classify the digits (concepts) while predicting their sum (final label). Notably, the restricted support is designed to stir up shortcut reasoning, with a total of 49 distinct RSs a model may take. Since the training support is incomplete, thus shortcuts cannot be avoided by simply processing each digit in isolation. During training only 16 possible pairs of digits out of 100 are given - 8 comprising only even digits and 8 only odd digits - while at test time the model is presented with out-of-distribution pairs. The list of all possible training combinations and their labels are given in Table 6. Overall, the training set contains 6720 data, the validation set 1920, and the test set 960. Table 6: Pairs of digits and their label available in MNIST-EvenOdd. | $(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_0.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_6.png}}})$ | $6$ | $(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_1.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_5.png}}})$ | $6$ | | --- | --- | --- | --- | | $(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_2.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_8.png}}})$ | $10$ | $(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_3.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_7.png}}})$ | $10$ | | $(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_4.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_6.png}}})$ | $10$ | $(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_1.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_9.png}}})$ | $10$ | | $(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_4.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_8.png}}})$ | $12$ | $(\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_3.png}}},\vbox{\hbox{∈cludegraphics[height=10.0pt]{figures/digits/mnist_9.png}}})$ | $12$ | Kand-Logic [34, 30] <details> <summary>x2.png Details</summary>  ### Visual Description ## Diagram: Categorical Shape Distribution ### Overview The image depicts a collection of colored geometric shapes (circles, triangles, squares) arranged in a scattered pattern. A legend on the right side maps colors to shapes: blue for circles, yellow for triangles, and red for squares. No textual labels, axis titles, or numerical data are present. ### Components/Axes - **Legend**: Located in the top-right quadrant, with three entries: - Blue circle labeled "Circle" - Yellow triangle labeled "Triangle" - Red square labeled "Square" - **Shapes**: - **Blue Circles**: Two instances (top-left and center-right). - **Yellow Triangles**: Two instances (center-left and bottom-right). - **Red Squares**: Three instances (bottom-left, center, and top-right). - **Spatial Arrangement**: Shapes are distributed unevenly across the image, with no discernible alignment or grouping. ### Detailed Analysis - **Legend-Data Correlation**: - Blue circles match the "Circle" legend entry. - Yellow triangles match the "Triangle" legend entry. - Red squares match the "Square" legend entry. - **Quantitative Observations**: - **Circles**: 2 total (blue). - **Triangles**: 2 total (yellow). - **Squares**: 3 total (red). - **Spatial Distribution**: - Circles are positioned in the upper and central regions. - Triangles occupy central and lower regions. - Squares are spread across the lower, central, and upper-right regions. ### Key Observations 1. **Color-Shape Consistency**: All shapes adhere strictly to the legend’s color mappings. 2. **Imbalance in Quantity**: Squares outnumber circles and triangles by 1. 3. **No Textual Elements**: The image contains no labels, annotations, or numerical data. ### Interpretation This diagram appears to represent a categorical distribution of shapes, possibly for classification or grouping purposes. The absence of numerical data or textual context suggests it may serve as a visual aid for conceptual categorization rather than quantitative analysis. The imbalance in square quantities could imply a focus on redundancy or emphasis on that category. The scattered arrangement might indicate randomness or lack of hierarchical structure. **Note**: The image provides no factual or numerical data beyond categorical representation. All interpretations are speculative based on visual patterns. </details> Figure 13: Datapoint from Kand-Logic. Inspired by the artworks of Wassily Kandinsky, this task involves non-trivial perception to classify shapes and colours, and logical reasoning to infer patterns among them. Each datapoint $(\mathbf{x}_{1},\mathbf{x}_{2},\mathbf{x}_{3})$ consists of three $64× 64$ images, representing three geometric primitives each. An example is depicted in Figure 13. Every sample is labelled as 1 whether all images either include the same number of primitives with the same shape or with the same colour, and 0 otherwise. In order to formally specify the background knowledge K, we define six binary classes, deterministically determined from the concept classes: - $\texttt{SameS}_{i}$ (resp. $\texttt{SameC}_{i}$ ) capturing whether all the primitives in $\mathbf{x}_{i}$ have the same shape (resp. color) or not, - $\texttt{DiffS}_{i}$ (resp. $\texttt{DiffC}_{i}$ ) capturing whether all primitives in $\mathbf{x}_{i}$ have different shape (resp. color) or not, and - $\texttt{TwoS}_{i}$ (resp. $\texttt{TwoC}_{i}$ ) capturing whether exactly two of the three primitives in $\mathbf{x}_{i}$ have the same shape (resp. color) or not. The background knowledge is given by | | $\displaystyle\textsc{K}\iff$ | $\displaystyle((\texttt{DiffS}_{1}\wedge\texttt{DiffS}_{2}\wedge\texttt{DiffS}_{3})\vee(\texttt{TwoS}_{1}\wedge\texttt{TwoS}_{2}\wedge\texttt{TwoS}_{3})\vee$ | | | --- | --- | --- | --- | Thus specifying that all images either include the same number of primitives with the same shape or with the same colour. For example, Figure 13 shows an image whose label is 1 because all the primitives appearing in each image have different shapes and different colours. Overall, the training set consists of 4000 datapoints, while the validation and test sets of 1000. Each image in turn shows three shapes, for a total of 9 primitives per datapoint. BDD-OIA [50] This real-world and high-stake autonomous driving dataset was originally proposed as an extension of BDD-100k [52] and contains a total of $\sim\!\!22.5$ k frames captured from the ego-vehicle. Each frame, whose size is $720× 1280$ , receives labels from {MoveForward, Stop, TurnLeft, TurnRight} to reflect the right action to be undertaken. The goal is to correctly classify the reasons (concepts) behind each action (final label, e.g. given $\text{{\sl Person}}\vee\text{{\sl RedLight}}\implies$ Stop, Person caused Stop). Frames are processed using a Faster-RCNN model [38] and the first pre-trained layer from [39] so as to obtain 2048-dimensional embeddings expressing the features present in each training scene. These embeddings are then used to train the NeSy models. Each frame (or equivalently, embedding) is annotated with one of 4 possible labels {MoveForward, Stop, TurnLeft, TurnRight}, each indicating a possible action taken by the ego-vehicle. The learning task, differently from the previous ones, is multi-label: multiple different actions can be labelled as possible in the provided scene with the only exception of MoveForward and Stop that are clearly mutually exclusive choices. Additionally, each embedding is annotated with a subset of the 21 concepts that might cause the action: | | $\displaystyle\{$ | $\displaystyle\text{{\sl GreenLight}},\text{{\sl RedLight}},\text{\sl{TrafficSign}},\text{{\sl Follow}},\text{\sl{RoadClear}},\text{\sl{Car}},\text{\sl{Person}},\text{\sl{Rider}},\text{\sl{OtherObstacle}},$ | | | --- | --- | --- | --- | The rules in K specify concept-to-concept and concept-to-action relations. For example: | | | $\displaystyle\text{{\sl RedLight}}→\neg\text{{\sl GreenLight}},$ | | | --- | --- | --- | --- | (a) Both Images in the BDD-OIA dataset are labelled as Rider inducing a Stop action. For the complete specification of the background knowledge K see Appendix C.2.5 of [31]. This dataset presents us with several challenges: - Many concepts are under-represented, making it difficult for the model to learn to recognize them effectively. In particular the exact distribution of the concepts is shown in Table 7. As we can see the training data are heavily unbalanced, with some concepts being represented by only a few examples; - The labels are noisy, and may contain errors or inconsistencies. For example some image may be labelled with both the actions MoveForward and Stop, which are mutually exclusive. This is typical of large datasets, especially the real world ones like BDD-OIA, where the labelling process is often done by humans and may be subject to errors or inconsistencies; - In some frames temporal information may be lost. See Figure 15(a) for an example where the temporal information is needed to correctly label the concepts. Indeed, in the Figure we can see that both the frames are labelled as Rider, but in (a) it is clear that Rider is present and cause for the stop, while in (b) the Rider is already far away and we are able to infer the correct concept only by looking at the previous ones; conversely, the embeddings of the scene are generated by looking at a single frame at a time. This limitation is known, as it was already highlighted by [39]; - Single frames may lack contextual information, which can be important for understanding the scene. For example, in Figure 15(b) we can see that the context of the pedestrians is crucial for understanding the correct action to be taken. Indeed, even though in both frames the pedestrians are crossing the street, the context is different: in (a) the pedestrians are crossing the street and they are the only reason for the stop, while in (b) there is also a traffic light that is red. This means that in (a) the pedestrians are labelled as present because the car stops in front of them, while in (b) the pedestrians are not labelled as present because the car stops due to the red light. (b) Both Images in the BDD-OIA show instances of the Pedestrian class, yet only (a) is labelled as such since the pedestrians in (b) did not cause the ego-vehicle to halt. Appendix E Experimental Setup Neural Architectures As backbone concept extractors for the baseline models we used the architecture [5]. On the other hand, as a neural prototypical extractor model for the MNIST-Even-Odd task, we used the same convolutional neural network as in [42] composed of four convolutional blocks: the first one is a $1× 64$ and the others $64× 64$ , respectively. Each blocks consists of a $3× 3$ convolutional filter, a batch normalization layer [20], a ReLU nonlinearity, and a $2× 2$ max-pooling layer. One such prototypical network is used to classify all digits. The same architecture has also been employed for the Kand-Logic task, with the exception that prototypical networks work on three RGB channels and their inputs are primitives detected in their corresponding images using YOLO [37]. In particular, we adopted YOLOv11 [21] that exhibits enhanced detection capabilities in virtue of the introduction of cross-stage partial blocks, spatial pyramid pooling, and convolutional blocks with Parallel Spatial Attention components. For running our experiments on Kand-Logic the nano version of YOLO was sufficient for the purpose of primitive detection. The model was trained on the same support set constructed through data augmentation for prototypical networks. We employed two prototypical extractors, sharing the same architecture and support set, for the task of classifying primitives shapes and colours. For this tasks, the backbone extractors for baseline are modified so as to process independently each primitive extracted using YOLO. We also employ two distinct concept extractors to process in a disentangled manner both shapes and colours, matching exactly the same setup for prototypical models. As for BDD-OIA, each original frame is processed following [39] by the means of a Faster-RCNN model that was pre-trained on MS-COCO and then fine-tuned on BDD-100k [52]. Through the Faster-RCNN backbone the features for the objects in the scene are computed (e.g., traffic lights). Subsequently, we employ the first pre-trained layer from [39] to produce a 2048-dimensional which we use to train the NeSy models. To process the embeddings we created, the standard architecture of prototypical extractors from [42] was adapted to work with 1D convolutions. More in details, the prototypical architecture we employed adopts three convolutional blocks, including a $1× 32$ , $32× 64$ and $64× 128$ layer respectively, each comprising 5-wide convolutional filters, batch normalization, ReLU activation and a 1D kernel size $2$ max-pooling layer. The last block replaces max-pooling with adaptive average pooling of length 1. Finally, the output is flattened and further processed through a linear layer, 1D batch normalization and ReLU to yield a 256-dimensional embedding. For BDD-OIA, 21 prototypical extractors were employed, each classifying one concepts. As for the case of Kand-Logic, we modify the standard baseline to use the same number of backbones as the prototypical models. All of our models were trained via SGD with Adam [22], a learning rate equal to $10^{-3}$ , and weight decay as the regularization method. Table 7: Concept-level number and percentage of occurrences for each class in 16080 training frames from the BDDOIA dataset. | Green Light | 5478 | 34.07% | | --- | --- | --- | | Follow Traffic | 2448 | 15.22% | | Road is clear | 3422 | 21.28% | | Red Light | 3766 | 23.42% | | Traffic Sign | 1095 | 6.81% | | Obstacle Car | 171 | 1.06% | | Obstacle Person | 116 | 0.72% | | Obstacle Rider | 3703 | 23.03% | | Obstacle Other | 329 | 2.05% | | No Lane Left | 100 | 0.62% | | Obstacle on Left | 464 | 2.89% | | Solid Line Left | 220 | 1.37% | | On Right Turn Lane | 115 | 0.72% | | Traffic Light Allows Right | 629 | 3.91% | | Front Car Turning Right | 270 | 1.68% | | No Lane Right | 3182 | 19.79% | | Obstacle on Right | 3177 | 19.76% | | Solid Line Right | 2587 | 16.09% | | On Left Turn Lane | 4303 | 26.76% | | Traffic Light Allows Left | 2796 | 17.39% | | Front Car Turning Left | 1563 | 9.72% | Support sets For most of the experiments we worked with at most one annotation per concept. As we showed in Section 6 RQ1, this is enough to curb the reasoning shortcut problem. Under this premise, in many experiments we decided to use standard data augmentation techniques on the annotated data from the support set to pretrain and supervise standard NeSy models (as shown in Section 6) and/or slightly improve the generalization ability of our prototypical extractors. For example, In MNIST-EvenOdd, each annotated concept gets augmented through rotations (40 data points generated), translation (144 data points), scaling (10 data points), elastic distortion (25 data points) and Gaussian noise addition (4 data points). These transformations try to mimic some of the variability observed in handwriting. Likewise, for Kand-Logic the chosen transformations are scaling, anti-aliasing addition and translation, as the generated data are representative of the primitives the actual dataset contains. In the latter case, we generate 163 data points per (shape, colour) pair. For BDD-OIA, given a concept $j$ , at least 6 samples are drawn with $i$ label 1. Then positive (resp. negative) samples are added from samples positive for each class $j^{\prime}$ , $j≠ j^{\prime}$ , where $j$ also occurs (resp. does not occur). We end up with $≈ 200$ samples per class, more than 85% of which are negatives. No data augmentation is used and the prototypical networks are all trained using one training batch randomly sampled at training time, with some classes being significantly under-represented, as shown in Table 7. Hyperparameters All the experiments were run across ten seeds: 0, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768. The value of the following hyperparameters is used consistently for all the experiments when training the NeSy models to predict weak labels for each example in $\mathcal{D}$ : - exponential decay rate $\beta$ : $0.99$ ; - number of epochs: $10$ for MNIST-EvenOdd and Kand-Logic, $40$ for BDD-OIA; - semantic loss weight $w_{\text{sl}}$ : $10.0$ ; - warm-up steps for learning rate increase: $0$ . On the other hand, these hyperparameters were used across different models and tasks for the episodic training of prototypical networks: - learning rate for prototypical networks training: $10^{-3}$ ; - number of support and query examples for prototypical networks training: $10$ ( $5$ each) if the support set is expanded with data augmentation and $2$ ( $1$ each) otherwise; - number of episodes per training epoch: $100$ . As for the model and application specific parameters, for every task we report a detailed list of all the hyperparameters we used for training NeSy models over the weakly labelled examples. We use $B$ for batch size, $\gamma$ for the learning rate and $\omega$ for the weight decay. For LTN $p$ refers to the hyperparameter for quantifiers. When the models are trained with Shannon Entropy, the parameter $w_{h}$ indicates its weight. Lastly, $m$ denotes the embedding dimension for the prototypes extracted. MNIST-EvenOdd. - DPL: $B=32$ , $\gamma=10^{-3}$ , $\omega=10^{-4}$ , $w_{h}=1$ , $m=64$ , - LTN: $B=64$ , $\gamma=10^{-3}$ , $\omega=10^{-4}$ , $p=6$ , $w_{h}=10$ , AND operation uses Godel, OR and IMPLICATION Product as fuzzy semantics, $m=64$ , - SL: $B=32$ , $\gamma=10^{-3}$ , $\omega=10^{-4}$ , $m=64$ . - CCN+: $B=32$ , $\gamma=10^{-3}$ , $\omega=10^{-4}$ , $m=64$ . - ABL: $B=32$ , $\gamma=10^{-3}$ , $\omega=10^{-4}$ Kand-Logic. - DPL: $B=32$ , $\gamma=10^{-4}$ , $\omega=0$ , $w_{h}=1$ , $m=1024$ , - LTN: $B=64$ , $\gamma=10^{-3}$ , $\omega=10^{-3}$ , $p=8$ , $w_{h}=0.8$ , AND operation uses Godel, OR and IMPLICATION Product as fuzzy semantics, $m=1024$ , - SL: $B=32$ , $\gamma=10^{-3}$ , $\omega=10^{-4}$ , $m=1024$ . BDD-OIA. - DPL: $B=128$ , $\gamma=10^{-3}$ , $\omega=10^{-4}$ , $w_{h}=1$ , $m=256$ . Notice that lowering the value and $m$ in the case of BDD-OIA was necessary as we observed the prototypical networks can in some cases easily overfit the training embeddings. Computing Infrastructure All the experiments run on a machine equipped with the following: - Intel® Xeon® CPU E5-2620 v3 @ 2.40GHz, 24 Cores, 48 Threads; - 4 NVidia TITAN Xp GPU, 12 GB GDDR5X, 3840 CUDA Cores. whose operating system is Ubuntu 20.04.5 LTS and CUDA Version 12.2. For realizing the code of our experiments we used Python 3.20 and Pytorch 1.13.0. Appendix F Additional Results In this Section we include the additional results we obtained for each research question and experiment which we could not include in the main body of the paper due to space constraints. RQ1: Can Prototypical Neurosymbolic AI avoid reasoning shortcuts? The complete results for prototypical NeSy models are reported in Table 8, 10 and 9 for the MNIST-EvenOdd, Kand-Logic and BDD-OIA task respectively. In the Tables our mitigation strategy resorting on prototypical concept extractor is denoted as PNet, while PNet ⋆ is the variant who employs standard data augmentation techniques to enhance the variety of the support set, as explained in Appendix E, on MNIST-EvenOdd and Kand-Logic. Regarding MNIST-EvenOdd we introduced several additional baselines exploiting the annotations from the prototypical support sets in various ways. In particular, the other considered mitigations are: - support set $S$ concept supervision: similarly to the mitigation strategy C, proposed in [31], during training we supervise the NeSy models with the annotations in $S$ that undergone an additional data augmentation step, so as to steer them towards the correct predictions. We denote this variant as C(S) ⋆; - pretraining: the models’ backbones are trained in a supervised fashion on the support set before training them on the target task. In this way the baselines can leverage the support set information to learn better initial parameters. The main text discusses pretraining (Pre ⋆) on the support set until convergence before training on the weakly supervised data. We also tested epoch pretraining (EPre ⋆), where the model is pretrained on the support set for one epoch before each training epoch on the actual task. This second pretraining strategy is designed to closely resemble the execution of Algorithm 1 used to train our prototypical models; - combinations of pretraining and support set concept supervision. These additional baselines are useful to demonstrate that the performance gains we present are due to our architecture, rather than the support set information. From Table 8 two main observations can be made. First, Prototypical Neurosymbolic models effectively avoid reasoning shortcuts. Second, none of the baselines introduced is competitive with their prototypical counterpart across all metrics and all the models studied. Table 8: Different mitigations strategies compared across NeSy models, trained with 100% of MNIST-EvenOdd data. Best results are in bold and second best underlined. | Model / Mitigation Logic Tensor Network Baseline | Acc(C)( $\uparrow$ ) $0.13{\mbox{\scriptsize$± 0.07$}}$ | F1(C)( $\uparrow$ ) $0.05{\mbox{\scriptsize$± 0.04$}}$ | Acc(Y)( $\uparrow$ ) $0.61{\mbox{\scriptsize$± 0.18$}}$ | F1(Y)( $\uparrow$ ) $0.66{\mbox{\scriptsize$± 0.10$}}$ | Cls(C)( $\downarrow$ ) $0.79{\mbox{\scriptsize$± 0.08$}}$ | | --- | --- | --- | --- | --- | --- | | R | $0.14{\mbox{\scriptsize$± 0.07$}}$ | $0.05{\mbox{\scriptsize$± 0.02$}}$ | $0.72{\mbox{\scriptsize$± 0.00$}}$ | $0.71{\mbox{\scriptsize$± 0.01$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | H | $0.55{\mbox{\scriptsize$± 0.14$}}$ | $0.55{\mbox{\scriptsize$± 0.14$}}$ | $0.77{\mbox{\scriptsize$± 0.09$}}$ | $0.85{\mbox{\scriptsize$± 0.08$}}$ | $0.08{\mbox{\scriptsize$± 0.02$}}$ | | C | $0.26{\mbox{\scriptsize$± 0.00$}}$ | $0.12{\mbox{\scriptsize$± 0.00$}}$ | $0.77{\mbox{\scriptsize$± 0.00$}}$ | $0.78{\mbox{\scriptsize$± 0.00$}}$ | $0.71{\mbox{\scriptsize$± 0.00$}}$ | | C(S) ⋆ | $0.46{\mbox{\scriptsize$± 0.31$}}$ | $0.37{\mbox{\scriptsize$± 0.35$}}$ | $0.80{\mbox{\scriptsize$± 0.12$}}$ | $0.61{\mbox{\scriptsize$± 0.10$}}$ | $0.49{\mbox{\scriptsize$± 0.29$}}$ | | R+H | $0.65{\mbox{\scriptsize$± 0.10$}}$ | $0.61{\mbox{\scriptsize$± 0.10$}}$ | $0.74{\mbox{\scriptsize$± 0.20$}}$ | $0.81{\mbox{\scriptsize$± 0.20$}}$ | $0.21{\mbox{\scriptsize$± 0.16$}}$ | | R+C | $0.23{\mbox{\scriptsize$± 0.00$}}$ | $0.10{\mbox{\scriptsize$± 0.00$}}$ | $0.75{\mbox{\scriptsize$± 0.00$}}$ | $0.75{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | H+C | 0.98 $± 0.00$ | 0.98 $± 0.00$ | 0.97 $± 0.00$ | 0.98 $± 0.00$ | $\underline{0.01}{\mbox{\scriptsize$± 0.00$}}$ | | R+H+C | $\underline{0.95}{\mbox{\scriptsize$± 0.00$}}$ | $0.95{\mbox{\scriptsize$± 0.00$}}$ | $0.91{\mbox{\scriptsize$± 0.00$}}$ | $\underline{0.94}{\mbox{\scriptsize$± 0.00$}}$ | $0.04{\mbox{\scriptsize$± 0.00$}}$ | | Pre ⋆ | $0.51{\mbox{\scriptsize$± 0.22$}}$ | $0.39{\mbox{\scriptsize$± 0.25$}}$ | $0.89{\mbox{\scriptsize$± 0.07$}}$ | $0.70{\mbox{\scriptsize$± 0.06$}}$ | $0.45{\mbox{\scriptsize$± 0.23$}}$ | | Pre ⋆ +C(S) ⋆ | $0.72{\mbox{\scriptsize$± 0.27$}}$ | $0.64{\mbox{\scriptsize$± 0.34$}}$ | $0.94{\mbox{\scriptsize$± 0.06$}}$ | $0.71{\mbox{\scriptsize$± 0.05$}}$ | $0.24{\mbox{\scriptsize$± 0.25$}}$ | | Pre ⋆ | $0.27{\mbox{\scriptsize$± 0.24$}}$ | $0.19{\mbox{\scriptsize$± 0.26$}}$ | $0.78{\mbox{\scriptsize$± 0.09$}}$ | $0.58{\mbox{\scriptsize$± 0.08$}}$ | $0.62{\mbox{\scriptsize$± 0.21$}}$ | | PNet (ours) | $\underline{0.95}{\mbox{\scriptsize$± 0.03$}}$ | $0.95{\mbox{\scriptsize$± 0.03$}}$ | $0.91{\mbox{\scriptsize$± 0.05$}}$ | $0.71{\mbox{\scriptsize$± 0.03$}}$ | 0.00 $± 0.00$ | | PNet ⋆ (ours) | 0.98 $± 0.00$ | $\underline{0.97}{\mbox{\scriptsize$± 0.00$}}$ | $\underline{0.95}{\mbox{\scriptsize$± 0.01$}}$ | $0.73{\mbox{\scriptsize$± 0.00$}}$ | 0.00 $± 0.00$ | | Semantic Loss | | | | | | | Baseline | $0.08{\mbox{\scriptsize$± 0.12$}}$ | $0.04{\mbox{\scriptsize$± 0.04$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.68{\mbox{\scriptsize$± 0.04$}}$ | | R | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | H | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | C | $0.30{\mbox{\scriptsize$± 0.01$}}$ | $0.22{\mbox{\scriptsize$± 0.01$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.60{\mbox{\scriptsize$± 0.01$}}$ | | C(S) ⋆ | $0.56{\mbox{\scriptsize$± 0.24$}}$ | $0.45{\mbox{\scriptsize$± 0.27$}}$ | 0.99 $± 0.01$ | 0.99 $± 0.01$ | $0.26{\mbox{\scriptsize$± 0.24$}}$ | | R+H | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | R+C | $0.54{\mbox{\scriptsize$± 0.07$}}$ | $0.46{\mbox{\scriptsize$± 0.07$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.47{\mbox{\scriptsize$± 0.00$}}$ | | H+C | $0.38{\mbox{\scriptsize$± 0.08$}}$ | $0.31{\mbox{\scriptsize$± 0.07$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.50{\mbox{\scriptsize$± 0.00$}}$ | | R+H+C | $0.40{\mbox{\scriptsize$± 0.10$}}$ | $0.35{\mbox{\scriptsize$± 0.10$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.50{\mbox{\scriptsize$± 0.01$}}$ | | Pre ⋆ | $0.52{\mbox{\scriptsize$± 0.25$}}$ | $0.42{\mbox{\scriptsize$± 0.28$}}$ | $0.98{\mbox{\scriptsize$± 0.00$}}$ | $0.98{\mbox{\scriptsize$± 0.01$}}$ | $0.40{\mbox{\scriptsize$± 0.24$}}$ | | Pre ⋆ +C(S) ⋆ | $0.78{\mbox{\scriptsize$± 0.22$}}$ | $0.71{\mbox{\scriptsize$± 0.29$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.17{\mbox{\scriptsize$± 0.19$}}$ | | Pre ⋆ | $0.95{\mbox{\scriptsize$± 0.10$}}$ | $\underline{0.94}{\mbox{\scriptsize$± 0.12$}}$ | $\underline{0.98}{\mbox{\scriptsize$± 0.00$}}$ | $\underline{0.98}{\mbox{\scriptsize$± 0.00$}}$ | $\underline{0.03}{\mbox{\scriptsize$± 0.09$}}$ | | PNet (ours) | $\underline{0.98}{\mbox{\scriptsize$± 0.01$}}$ | 0.98 $± 0.01$ | $0.97{\mbox{\scriptsize$± 0.01$}}$ | $0.74{\mbox{\scriptsize$± 0.00$}}$ | 0.00 $± 0.00$ | | PNet ⋆ (ours) | 0.99 $± 0.00$ | 0.98 $± 0.01$ | $0.97{\mbox{\scriptsize$± 0.01$}}$ | $0.74{\mbox{\scriptsize$± 0.00$}}$ | 0.00 $± 0.00$ | | DeepProbLog | | | | | | | Baseline | $0.08{\mbox{\scriptsize$± 0.10$}}$ | $0.04{\mbox{\scriptsize$± 0.05$}}$ | $0.87{\mbox{\scriptsize$± 0.06$}}$ | $0.94{\mbox{\scriptsize$± 0.04$}}$ | $0.67{\mbox{\scriptsize$± 0.05$}}$ | | R | $0.17{\mbox{\scriptsize$± 0.00$}}$ | $0.07{\mbox{\scriptsize$± 0.00$}}$ | $0.75{\mbox{\scriptsize$± 0.00$}}$ | $0.74{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | H | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | C | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.75{\mbox{\scriptsize$± 0.00$}}$ | $0.84{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | C(S) ⋆ | $0.26{\mbox{\scriptsize$± 0.11$}}$ | $0.15{\mbox{\scriptsize$± 0.07$}}$ | $0.84{\mbox{\scriptsize$± 0.07$}}$ | $0.84{\mbox{\scriptsize$± 0.08$}}$ | $0.68{\mbox{\scriptsize$± 0.06$}}$ | | R+H | $0.16{\mbox{\scriptsize$± 0.00$}}$ | $0.09{\mbox{\scriptsize$± 0.02$}}$ | $0.83{\mbox{\scriptsize$± 0.06$}}$ | $0.85{\mbox{\scriptsize$± 0.06$}}$ | $0.63{\mbox{\scriptsize$± 0.00$}}$ | | R+C | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.01{\mbox{\scriptsize$± 0.00$}}$ | $0.75{\mbox{\scriptsize$± 0.00$}}$ | $0.84{\mbox{\scriptsize$± 0.00$}}$ | $0.70{\mbox{\scriptsize$± 0.00$}}$ | | H+C | $\underline{0.97}{\mbox{\scriptsize$± 0.05$}}$ | $\underline{0.96}{\mbox{\scriptsize$± 0.06$}}$ | $0.96{\mbox{\scriptsize$± 0.02$}}$ | $0.97{\mbox{\scriptsize$± 0.02$}}$ | $0.03{\mbox{\scriptsize$± 0.05$}}$ | | R+H+C | 0.98 $± 0.00$ | 0.98 $± 0.00$ | $0.95{\mbox{\scriptsize$± 0.00$}}$ | $0.97{\mbox{\scriptsize$± 0.00$}}$ | $\underline{0.02}{\mbox{\scriptsize$± 0.00$}}$ | | Pre ⋆ | $0.64{\mbox{\scriptsize$± 0.22$}}$ | $0.55{\mbox{\scriptsize$± 0.28$}}$ | $0.95{\mbox{\scriptsize$± 0.06$}}$ | $0.95{\mbox{\scriptsize$± 0.06$}}$ | $0.32{\mbox{\scriptsize$± 0.24$}}$ | | Pre ⋆ +C(S) ⋆ | $0.86{\mbox{\scriptsize$± 0.20$}}$ | $0.81{\mbox{\scriptsize$± 0.26$}}$ | 0.99 $± 0.01$ | 0.99 $± 0.01$ | $0.11{\mbox{\scriptsize$± 0.18$}}$ | | Pre ⋆ | $0.84{\mbox{\scriptsize$± 0.28$}}$ | $0.81{\mbox{\scriptsize$± 0.33$}}$ | $0.95{\mbox{\scriptsize$± 0.07$}}$ | $0.95{\mbox{\scriptsize$± 0.08$}}$ | $0.14{\mbox{\scriptsize$± 0.28$}}$ | | PNet (ours) | $\underline{0.97}{\mbox{\scriptsize$± 0.03$}}$ | $\underline{0.96}{\mbox{\scriptsize$± 0.04$}}$ | $\underline{0.98}{\mbox{\scriptsize$± 0.02$}}$ | $\underline{0.98}{\mbox{\scriptsize$± 0.02$}}$ | 0.00 $± 0.00$ | | PNet ⋆ (ours) | 0.98 $± 0.00$ | 0.98 $± 0.00$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | 0.00 $± 0.00$ | Table 9: Results of different RSs mitigation strategies for models trained on the BDD-OIA task employing 100% of the unsupervised data. Best results are in bold and second best are underlined. | Model / Mitigation DeepProbLog $\textit{Baseline}_{\texttt{inD}}$ | Acc(C)( $\uparrow$ ) $0.64{\mbox{\scriptsize$± 0.04$}}$ | F1(C)( $\uparrow$ ) $0.08{\mbox{\scriptsize$± 0.14$}}$ | Acc(Y)( $\uparrow$ ) $\underline{0.76}{\mbox{\scriptsize$± 0.01$}}$ | F1(Y)( $\uparrow$ ) $\underline{0.58}{\mbox{\scriptsize$± 0.08$}}$ | Cls(C)( $\downarrow$ ) $0.81{\mbox{\scriptsize$± 0.06$}}$ | | --- | --- | --- | --- | --- | --- | | $\textit{Baseline}_{\texttt{inD},\texttt{prD}}$ | $0.62{\mbox{\scriptsize$± 0.07$}}$ | $0.08{\mbox{\scriptsize$± 0.13$}}$ | 0.77 $± 0.01$ | 0.61 $± 0.04$ | $0.82{\mbox{\scriptsize$± 0.13$}}$ | | $\textit{C(S)${}^{\star}$}_{\texttt{inD}}$ | 0.83 $± 0.01$ | $0.07{\mbox{\scriptsize$± 0.16$}}$ | $0.74{\mbox{\scriptsize$± 0.02$}}$ | $0.46{\mbox{\scriptsize$± 0.05$}}$ | $0.70{\mbox{\scriptsize$± 0.06$}}$ | | $\textit{C(S)${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.81{\mbox{\scriptsize$± 0.01$}}$ | $\underline{0.11}{\mbox{\scriptsize$± 0.17$}}$ | $\underline{0.76}{\mbox{\scriptsize$± 0.01$}}$ | $0.53{\mbox{\scriptsize$± 0.05$}}$ | $\underline{0.51}{\mbox{\scriptsize$± 0.15$}}$ | | $\textit{Pre${}^{\star}$}_{\texttt{inD}}$ | 0.83 $± 0.01$ | $0.05{\mbox{\scriptsize$± 0.14$}}$ | $0.72{\mbox{\scriptsize$± 0.03$}}$ | $0.43{\mbox{\scriptsize$± 0.05$}}$ | $0.86{\mbox{\scriptsize$± 0.04$}}$ | | $\textit{Pre${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $\underline{0.82}{\mbox{\scriptsize$± 0.03$}}$ | $0.05{\mbox{\scriptsize$± 0.13$}}$ | $0.71{\mbox{\scriptsize$± 0.02$}}$ | $0.52{\mbox{\scriptsize$± 0.07$}}$ | $0.85{\mbox{\scriptsize$± 0.04$}}$ | | $\textit{Pre${}^{\star}$+C(S)${}^{\star}$}_{\texttt{inD}}$ | 0.83 $± 0.01$ | $0.07{\mbox{\scriptsize$± 0.16$}}$ | $0.73{\mbox{\scriptsize$± 0.02$}}$ | $0.41{\mbox{\scriptsize$± 0.04$}}$ | $0.75{\mbox{\scriptsize$± 0.08$}}$ | | $\textit{Pre${}^{\star}$+C(S)${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.81{\mbox{\scriptsize$± 0.02$}}$ | $0.10{\mbox{\scriptsize$± 0.16$}}$ | $\underline{0.76}{\mbox{\scriptsize$± 0.05$}}$ | $0.51{\mbox{\scriptsize$± 0.04$}}$ | $0.52{\mbox{\scriptsize$± 0.11$}}$ | | $\textit{EPre}_{\texttt{inD}}$ | 0.83 $± 0.02$ | $0.06{\mbox{\scriptsize$± 0.15$}}$ | $0.71{\mbox{\scriptsize$± 0.03$}}$ | $0.44{\mbox{\scriptsize$± 0.05$}}$ | $0.82{\mbox{\scriptsize$± 0.07$}}$ | | $\textit{EPre}_{\texttt{inD},\texttt{prD}}$ | 0.83 $± 0.01$ | $0.05{\mbox{\scriptsize$± 0.13$}}$ | $0.73{\mbox{\scriptsize$± 0.03$}}$ | $0.46{\mbox{\scriptsize$± 0.10$}}$ | $0.82{\mbox{\scriptsize$± 0.07$}}$ | | PNet | $0.60{\mbox{\scriptsize$± 0.03$}}$ | 0.16 $± 0.15$ | $0.63{\mbox{\scriptsize$± 0.05$}}$ | $0.41{\mbox{\scriptsize$± 0.08$}}$ | 0.35 $± 0.11$ | Regarding this second point, observe for instance that EPre ⋆ performs competitively with our solution on Semantic Loss, but it is outperformed by it on DeepProbLog and even more so on Logic Tensor Networks. Interestingly, Prototypical Neurosymbolic models also maintain - often even improve - their performance on label scores compared to the baselines affected by the reasoning shortcuts. This shows that enhancing concept alignment is also greatly beneficial to the overall task performance. The only exception to the above concerns the F1(Y) score. This metric is lower than that of their respective baselines in the case of Logic Tensor Networks and Semantic Loss. Conversely we do not observe this drop in performance for DeepProbLog, where the F1(Y) score is actually improved wrt. most baselines. The difference can be explained by the different ways in which these models integrate the reasoning and learning components. Indeed, DeepProbLog leverages constrained-output marginalization, and it allocates probability mass only to outputs that satisfy the logical constraints: as a consequence, during training gradient updates are considered only for digits participating in consistent sum predictions. In contrast, the semantic objective of Logic Tensor Networks and Semantic Loss allows for occasional miss-classification. Finally, notice that the use of data augmentation plays only a marginal role in avoiding reasoning shortcuts in Prototypical Neurosymbolic models: the difference in both the concept and label scores for the prototypical models with and without data augmentation is minimal. Thus data augmentation is considered only as a complementary technique to slightly improve concept alignment. We tested as well a more recent, state-of-the-art neurosymbolic model, namely Coherent by Construction NNs (CCN +). The results are shown in Table 11 and notice they are similar to the ones we previously discussed in Table 8: this evidence confirms that integrating NeSy models with prototypes is greatly beneficial in avoiding reasoning shortcuts, regardless of the particular model considered. To further expand our study, we then tested for shortcut reasoning the abductive learning (ABL) paradigm [6] as well. The results in Table 12 show that pretraining the ABL model and supervising with the augmented support set at training time (Pre ⋆ +C(S) ⋆) allows to successfully reconstruct the unlabelled concepts. However, in learning the concepts the model is not synergistically aligned with the final task (sum prediction), as pointed out by the significant drop in F1(Y) score. Conversely, prototypical NeSy models can reconstruct the unlabelled digits, while predicting the right final label. We run similar experiments for the Kand-Logic task. Here we allow for other two type of baselines: - Input Disentanglement (inD): the architecture of the baseline processes one single concept in isolation from the rest. - Predicate Disentanglement (prD): the architecture of the baselines processes one single concept with separate branches for each set of mutually exclusive concept classes. Since each concept is assigned a pair of different classes (i.e., a class of the shape and colour), distinguishing between inD and prD allows to effectively isolate the contribute of disentanglement from the one of prototypes. The results in Table 10 confirm the enhanced ability of PNet models in successfully retrieving the intended semantics for the intermediate concepts, while using them so comply with background knowledge. Moreover, they indicate that combining both forms of disentanglement with pretraining is generally the second best mitigation strategy across the board. Table 10: Different mitigations strategies compared across NeSy models, trained with 100% of Kand-Logic data. Best results are in bold and second best underlined. | Model / Mitigation | Acc(C)( $\uparrow$ ) | F1(C)( $\uparrow$ ) | Acc(Y)( $\uparrow$ ) | F1(Y)( $\uparrow$ ) | Cls(C)( $\downarrow$ ) | | --- | --- | --- | --- | --- | --- | | Logic Tensor Network | | | | | | | $\textit{Baseline}_{\texttt{inD}}$ | $0.37{\mbox{\scriptsize$± 0.04$}}$ | $0.32{\mbox{\scriptsize$± 0.06$}}$ | $0.50{\mbox{\scriptsize$± 0.01$}}$ | $0.36{\mbox{\scriptsize$± 0.03$}}$ | $0.26{\mbox{\scriptsize$± 0.22$}}$ | | $\textit{Baseline}_{\texttt{inD},\texttt{prD}}$ | $0.36{\mbox{\scriptsize$± 0.06$}}$ | $0.22{\mbox{\scriptsize$± 0.06$}}$ | $0.50{\mbox{\scriptsize$± 0.01$}}$ | $0.34{\mbox{\scriptsize$± 0.02$}}$ | $0.64{\mbox{\scriptsize$± 0.16$}}$ | | $\textit{C(S)${}^{\star}$}_{\texttt{inD}}$ | $0.39{\mbox{\scriptsize$± 0.03$}}$ | $0.34{\mbox{\scriptsize$± 0.04$}}$ | $0.51{\mbox{\scriptsize$± 0.01$}}$ | $0.41{\mbox{\scriptsize$± 0.06$}}$ | $0.26{\mbox{\scriptsize$± 0.16$}}$ | | $\textit{C(S)${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.60{\mbox{\scriptsize$± 0.06$}}$ | $0.52{\mbox{\scriptsize$± 0.06$}}$ | $0.51{\mbox{\scriptsize$± 0.01$}}$ | $0.36{\mbox{\scriptsize$± 0.04$}}$ | $0.54{\mbox{\scriptsize$± 0.09$}}$ | | $\textit{Pre${}^{\star}$}_{\texttt{inD}}$ | $0.57{\mbox{\scriptsize$± 0.01$}}$ | $0.56{\mbox{\scriptsize$± 0.01$}}$ | $0.51{\mbox{\scriptsize$± 0.00$}}$ | $0.43{\mbox{\scriptsize$± 0.01$}}$ | 0.00 $± 0.00$ | | $\textit{Pre${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.90{\mbox{\scriptsize$± 0.01$}}$ | $\underline{0.90}{\mbox{\scriptsize$± 0.01$}}$ | $0.76{\mbox{\scriptsize$± 0.03$}}$ | $0.74{\mbox{\scriptsize$± 0.04$}}$ | 0.00 $± 0.00$ | | $\textit{Pre${}^{\star}$+C(S)${}^{\star}$}_{\texttt{inD}}$ | $0.43{\mbox{\scriptsize$± 0.02$}}$ | $0.40{\mbox{\scriptsize$± 0.02$}}$ | $0.50{\mbox{\scriptsize$± 0.00$}}$ | $0.34{\mbox{\scriptsize$± 0.01$}}$ | $\underline{0.16}{\mbox{\scriptsize$± 0.05$}}$ | | $\textit{Pre${}^{\star}$+C(S)${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.88{\mbox{\scriptsize$± 0.03$}}$ | $0.87{\mbox{\scriptsize$± 0.03$}}$ | $0.53{\mbox{\scriptsize$± 0.03$}}$ | $0.39{\mbox{\scriptsize$± 0.05$}}$ | 0.00 $± 0.00$ | | PNet (ours) | $\underline{0.91}{\mbox{\scriptsize$± 0.01$}}$ | $\underline{0.90}{\mbox{\scriptsize$± 0.01$}}$ | $\underline{0.79}{\mbox{\scriptsize$± 0.03$}}$ | $\underline{0.78}{\mbox{\scriptsize$± 0.03$}}$ | 0.00 $± 0.00$ | | PNet ⋆ (ours) | 0.93 $± 0.01$ | 0.92 $± 0.01$ | 0.87 $± 0.05$ | 0.87 $± 0.05$ | 0.00 $± 0.00$ | | Semantic Loss | | | | | | | $\textit{Baseline}_{\texttt{inD}}$ | $0.33{\mbox{\scriptsize$± 0.03$}}$ | $0.22{\mbox{\scriptsize$± 0.04$}}$ | $0.50{\mbox{\scriptsize$± 0.00$}}$ | $0.33{\mbox{\scriptsize$± 0.00$}}$ | $0.57{\mbox{\scriptsize$± 0.33$}}$ | | $\textit{Baseline}_{\texttt{inD},\texttt{prD}}$ | $0.35{\mbox{\scriptsize$± 0.05$}}$ | $0.20{\mbox{\scriptsize$± 0.04$}}$ | $0.50{\mbox{\scriptsize$± 0.00$}}$ | $0.33{\mbox{\scriptsize$± 0.00$}}$ | $0.73{\mbox{\scriptsize$± 0.12$}}$ | | $\textit{C(S)${}^{\star}$}_{\texttt{inD}}$ | $0.39{\mbox{\scriptsize$± 0.03$}}$ | $0.26{\mbox{\scriptsize$± 0.06$}}$ | $0.50{\mbox{\scriptsize$± 0.00$}}$ | $0.34{\mbox{\scriptsize$± 0.01$}}$ | $0.56{\mbox{\scriptsize$± 0.25$}}$ | | $\textit{C(S)${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.65{\mbox{\scriptsize$± 0.08$}}$ | $0.60{\mbox{\scriptsize$± 0.07$}}$ | $0.50{\mbox{\scriptsize$± 0.00$}}$ | $0.33{\mbox{\scriptsize$± 0.00$}}$ | $0.36{\mbox{\scriptsize$± 0.11$}}$ | | $\textit{Pre${}^{\star}$}_{\texttt{inD}}$ | $0.58{\mbox{\scriptsize$± 0.00$}}$ | $0.57{\mbox{\scriptsize$± 0.00$}}$ | $0.51{\mbox{\scriptsize$± 0.00$}}$ | $0.43{\mbox{\scriptsize$± 0.01$}}$ | 0.00 $± 0.00$ | | $\textit{Pre${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $\underline{0.91}{\mbox{\scriptsize$± 0.01$}}$ | $0.90{\mbox{\scriptsize$± 0.01$}}$ | $0.77{\mbox{\scriptsize$± 0.05$}}$ | $0.76{\mbox{\scriptsize$± 0.06$}}$ | 0.00 $± 0.00$ | | $\textit{Pre${}^{\star}$+C(S)${}^{\star}$}_{\texttt{inD}}$ | $0.42{\mbox{\scriptsize$± 0.04$}}$ | $0.36{\mbox{\scriptsize$± 0.10$}}$ | $0.51{\mbox{\scriptsize$± 0.03$}}$ | $0.37{\mbox{\scriptsize$± 0.08$}}$ | $\underline{0.29}{\mbox{\scriptsize$± 0.33$}}$ | | $\textit{Pre${}^{\star}$+C(S)${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.88{\mbox{\scriptsize$± 0.02$}}$ | $0.87{\mbox{\scriptsize$± 0.02$}}$ | $0.50{\mbox{\scriptsize$± 0.00$}}$ | $0.33{\mbox{\scriptsize$± 0.00$}}$ | 0.00 $± 0.00$ | | PNet (ours) | 0.92 $± 0.02$ | 0.92 $± 0.02$ | 0.88 $± 0.10$ | 0.88 $± 0.11$ | 0.00 $± 0.00$ | | PNet ⋆ (ours) | 0.92 $± 0.01$ | $\underline{0.91}{\mbox{\scriptsize$± 0.01$}}$ | $\underline{0.82}{\mbox{\scriptsize$± 0.05$}}$ | $\underline{0.81}{\mbox{\scriptsize$± 0.05$}}$ | 0.00 $± 0.00$ | | DeepProbLog | | | | | | | $\textit{Baseline}_{\texttt{inD}}$ | $0.35{\mbox{\scriptsize$± 0.02$}}$ | $0.26{\mbox{\scriptsize$± 0.03$}}$ | $0.50{\mbox{\scriptsize$± 0.01$}}$ | $0.37{\mbox{\scriptsize$± 0.07$}}$ | $0.52{\mbox{\scriptsize$± 0.17$}}$ | | $\textit{Baseline}_{\texttt{inD},\texttt{prD}}$ | $0.39{\mbox{\scriptsize$± 0.05$}}$ | $0.25{\mbox{\scriptsize$± 0.06$}}$ | $0.50{\mbox{\scriptsize$± 0.01$}}$ | $0.33{\mbox{\scriptsize$± 0.00$}}$ | $0.66{\mbox{\scriptsize$± 0.18$}}$ | | $\textit{C(S)${}^{\star}$}_{\texttt{inD}}$ | $0.37{\mbox{\scriptsize$± 0.00$}}$ | $0.36{\mbox{\scriptsize$± 0.00$}}$ | $0.50{\mbox{\scriptsize$± 0.01$}}$ | $0.34{\mbox{\scriptsize$± 0.03$}}$ | $0.47{\mbox{\scriptsize$± 0.08$}}$ | | $\textit{C(S)${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.73{\mbox{\scriptsize$± 0.05$}}$ | $0.68{\mbox{\scriptsize$± 0.05$}}$ | $0.71{\mbox{\scriptsize$± 0.21$}}$ | $0.62{\mbox{\scriptsize$± 0.29$}}$ | $0.37{\mbox{\scriptsize$± 0.10$}}$ | | $\textit{Pre${}^{\star}$}_{\texttt{inD}}$ | $0.58{\mbox{\scriptsize$± 0.00$}}$ | $0.58{\mbox{\scriptsize$± 0.00$}}$ | $0.51{\mbox{\scriptsize$± 0.00$}}$ | $0.44{\mbox{\scriptsize$± 0.00$}}$ | 0.00 $± 0.00$ | | $\textit{Pre${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $\underline{0.92}{\mbox{\scriptsize$± 0.00$}}$ | $\underline{0.91}{\mbox{\scriptsize$± 0.00$}}$ | $\underline{0.81}{\mbox{\scriptsize$± 0.01$}}$ | $\underline{0.80}{\mbox{\scriptsize$± 0.01$}}$ | 0.00 $± 0.00$ | | $\textit{Pre${}^{\star}$+C(S)${}^{\star}$}_{\texttt{inD}}$ | $0.42{\mbox{\scriptsize$± 0.02$}}$ | $0.41{\mbox{\scriptsize$± 0.01$}}$ | $0.50{\mbox{\scriptsize$± 0.01$}}$ | $0.40{\mbox{\scriptsize$± 0.02$}}$ | $\underline{0.17}{\mbox{\scriptsize$± 0.06$}}$ | | $\textit{Pre${}^{\star}$+C(S)${}^{\star}$}_{\texttt{inD},\texttt{prD}}$ | $0.79{\mbox{\scriptsize$± 0.08$}}$ | $0.76{\mbox{\scriptsize$± 0.09$}}$ | $0.61{\mbox{\scriptsize$± 0.17$}}$ | $0.50{\mbox{\scriptsize$± 0.25$}}$ | $0.38{\mbox{\scriptsize$± 0.16$}}$ | | PNet (ours) | 0.94 $± 0.00$ | 0.94 $± 0.01$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | 0.00 $± 0.00$ | | PNet ⋆ (ours) | 0.94 $± 0.00$ | 0.94 $± 0.01$ | 0.99 $± 0.00$ | 0.99 $± 0.00$ | 0.00 $± 0.00$ | Table 11: Mitigation strategies compared for CCN + on MNIST-EvenOdd. Best results in bold and second best underlined. | Baseline C(S) ⋆ | Acc(C)( $\uparrow$ ) $0.03{\mbox{\scriptsize$± 0.07$}}$ $0.36{\mbox{\scriptsize$± 0.10$}}$ | F1(C)( $\uparrow$ ) $0.01{\mbox{\scriptsize$± 0.03$}}$ $0.24{\mbox{\scriptsize$± 0.08$}}$ | Acc(Y)( $\uparrow$ ) $0.92{\mbox{\scriptsize$± 0.10$}}$ $0.91{\mbox{\scriptsize$± 0.06$}}$ | F1(Y)( $\uparrow$ ) $0.92{\mbox{\scriptsize$± 0.11$}}$ $0.90{\mbox{\scriptsize$± 0.07$}}$ | Cls(C)( $\downarrow$ ) $0.73{\mbox{\scriptsize$± 0.05$}}$ $0.52{\mbox{\scriptsize$± 0.11$}}$ | | --- | --- | --- | --- | --- | --- | | Pre ⋆ | $0.33{\mbox{\scriptsize$± 0.11$}}$ | $0.22{\mbox{\scriptsize$± 0.10$}}$ | $0.91{\mbox{\scriptsize$± 0.09$}}$ | $0.91{\mbox{\scriptsize$± 0.09$}}$ | $0.57{\mbox{\scriptsize$± 0.09$}}$ | | Pre ⋆ +C(S) ⋆ | $0.54{\mbox{\scriptsize$± 0.21$}}$ | $0.91{\mbox{\scriptsize$± 0.10$}}$ | $0.92{\mbox{\scriptsize$± 0.09$}}$ | $0.91{\mbox{\scriptsize$± 0.10$}}$ | $0.34{\mbox{\scriptsize$± 0.22$}}$ | | EPre ⋆ | $0.66{\mbox{\scriptsize$± 0.14$}}$ | $0.56{\mbox{\scriptsize$± 0.17$}}$ | 0.97 $± 0.03$ | 0.97 $± 0.03$ | $\underline{0.25}{\mbox{\scriptsize$± 0.16$}}$ | | PNet (ours) | $\underline{0.96}{\mbox{\scriptsize$± 0.04$}}$ | $\underline{0.95}{\mbox{\scriptsize$± 0.05$}}$ | $\underline{0.96}{\mbox{\scriptsize$± 0.07$}}$ | $\underline{0.96}{\mbox{\scriptsize$± 0.08$}}$ | 0.00 $± 0.00$ | | PNet ⋆ (ours) | 0.98 $± 0.01$ | 0.97 $± 0.01$ | $\underline{0.96}{\mbox{\scriptsize$± 0.09$}}$ | $\underline{0.95}{\mbox{\scriptsize$± 0.11$}}$ | 0.00 $± 0.00$ | (a) Kand-Logic (shape, colour) concept confusion matrices for the standard and pretrained Semantic Loss model disentangled wrt. inputs (inD), inputs and the predicates (inD, prD) and integrating prototypes (PNet). Table 12: Standard mitigation strategies compared for ABL on MNIST-EvenOdd. | Baseline C(S) ⋆ Pre ⋆ | $0.06{\mbox{\scriptsize$± 0.09$}}$ $0.67{\mbox{\scriptsize$± 0.16$}}$ $0.90{\mbox{\scriptsize$± 0.03$}}$ | $0.03{\mbox{\scriptsize$± 0.05$}}$ $0.64{\mbox{\scriptsize$± 0.16$}}$ $0.89{\mbox{\scriptsize$± 0.02$}}$ | $0.70{\mbox{\scriptsize$± 0.08$}}$ $0.71{\mbox{\scriptsize$± 0.10$}}$ $0.83{\mbox{\scriptsize$± 0.04$}}$ | $0.31{\mbox{\scriptsize$± 0.14$}}$ $0.15{\mbox{\scriptsize$± 0.02$}}$ $0.15{\mbox{\scriptsize$± 0.01$}}$ | $0.56{\mbox{\scriptsize$± 0.15$}}$ $0.00{\mbox{\scriptsize$± 0.00$}}$ $0.00{\mbox{\scriptsize$± 0.00$}}$ | | --- | --- | --- | --- | --- | --- | | Pre ⋆ +C(S) ⋆ | $0.95{\mbox{\scriptsize$± 0.01$}}$ | $0.93{\mbox{\scriptsize$± 0.01$}}$ | $0.90{\mbox{\scriptsize$± 0.01$}}$ | $0.17{\mbox{\scriptsize$± 0.01$}}$ | $0.00{\mbox{\scriptsize$± 0.00$}}$ | Crucially, even though concept-level scores for this mitigation are comparable to PNet models, the performance on label-level metrics is lower than the one of our approach. This can be explained by the fact that the embedding update introduced in Section 4 does a better job than the standard NeSy update in aligning the concept representation with the final label prediction task. The improved concept alignment Nesy models enjoy when paired with prototypical extractors is even more clear looking at the confusion matrices: in Figure 25(a) we see how different mitigation strategies allow to gradually improve the Semantic Loss model ability to correctly reconstruct the unlabelled concepts, with the prototypical model being the better. Similar considerations hold for the confusion matrices reported in Figure 20(a) for the case of Kand-Logic: we can see that incorporating the disentanglement wrt. the shape and colour concepts does not help the Semantic Loss model to better disambiguate the concepts, but the difference between the two is evident as soon as the support set is made available for pretraining. Even in the case of a pretrained, fully disentangled model however, there concept $\square$ is often confused with $\triangle$ . On the other hand, the prototypical NeSy model does not suffer for this confusion. (a) MNIST-EvenOdd concept confusion matrices for different mitigation strategies. Lastly, we report the full results for BDD-OIA in Table 9. In this task the data are very unbalanced (c.f. Table 7). Interestingly, the best results our architecture achieves for F1(C) and Cls(C) show that the prototypical model is robust wrt. the unbalance and does not collapse its predictions on the dominant class “0”. Conversely, pretraining on the support set not help in mitigating the shortcut reasoning behaviour. Even worse, the score for F1(C) decreases for pretrained models wrt. the standard baselines. Overall, the most competitive approach with prototypical models is C(S) ⋆ in its twofold disentangled version. However, this baseline as well only achieves a minor improvement wrt. the F1(C) score (0.11) of the standard DeepProbLog model (0.08). Conversely, the PNet model doubles this score (0.16). In addition, even if the C(S) ⋆ baseline succeeds in reducing concept collapse (0.51), it is still far from the lower collapse of the prototypical model (0.35). We observe that label-level metrics and Acc(C) decrease in the PNet models: this is expected as, given the unbalanced data, baselines frequently predicting class “0”. (b) Extensive Comparison of Prototypical NeSy models (left) vs Standard Pretrained ones (right) supervised on support sets, across different percentages of unlabelled datapoints on MNIST-EvenOdd. RQ2. How does prototypical NeSy compare with other mitigation strategies? In Table 8 we report an exhaustive picture for the comparison of shortcut mitigation strategies in MNIST-EvenOdd. The Table accounts for the mitigations introduced in [31] already discussed in the main text (Section 6 (RQ2)): these are partial concept supervision (C), input reconstruction (R) via the introduction of a reconstruction loss with an encoder-decoder architecture, Shannon entropy loss (H), and combinations thereof. The scores for baseline models are obtained from [5] and we used the code for all the mitigation strategies and combinations thereof as in [31]. Also, to convey the broader picture, we included the computation for concept (Acc(C)) and label (Acc(Y)) accuracy. As expected, we see that the results wrt. Acc(C) mirror those reported in Table 4, where we reported the F1(C) for the same experiments. Moreover, our models consistently succeed in minimizing Cls(C), which is 0.0 across all the models considered. On the other hand, we see that the mitigation strategies generally do not have a great impact on the metrics over the final label (i.e., Acc(Y) and F1(Y)), as the NeSy models were already performing well on the unlabelled classes. RQ3. Are Prototypical NeSy models robust wrt. the number of unlabelled datapoints? In Figure 25(b) we report the results obtained in the same experiment reported in Section 6 (RQ3) wrt. the metrics Acc(C), Acc(Y), F1(C) and F1(Y). Similarly to F1(C), we can see from the Figure (a) that the results we obtain for ACC(C) using our PNets are very stable and improve as we add more unsupervised data. On the contrary, as (b) shows, if we use the standard NeSy models taking advantage of the supervisions both in a pretraining stage (Pre) and at training time with a cross-entropy loss (C(S), the results present a high variance and are very susceptible to the percentage of unsupervised data used for training. Similar considerations hold for ACC(Y) as well in (c) and (d), with only the Semantic Loss baseline model maintaining label accuracy scores comparable with the PNet approach. Moreover, from (e) and (f) we notice the PNet approach consistently improves the standard NeSy models F1(Y) score as well (with SL being the only exception) for all the percentages of unsupervised data. Crucially, observe from (h) that all the standard models suffer from high concept collapse. How much each model collapses it predictions is again susceptible to the percentage of unsupervised data used for training. Now compare this behaviour with (g): our prototypical models have 0.0 concept collapse across all the percentages of unsupervised data. (c) Acc(C), Acc(Y) and Cls(C) obtained with the Prototypical NeSy models on MNIST-EvenOdd when varying the number of hidden classes, i.e., the number of concepts for which we have zero examples. The red dotted lines indicate the performance of the corresponding baseline model. (d) Acc(C), Acc(Y) and Cls(C) obtained with the Prototypical NeSy models on Kand-Logic when varying the number of hidden classes, i.e., the number of concepts for which we have zero examples. The red dotted lines indicate the performance of the corresponding baseline model. (e) F1(C), Acc(C) and Cls(C) obtained with PNet+SL when varying the number of hidden classes and for different values of $p$ , i.e., for different lower-tail quantiles of the $\chi^{2}$ distribution. RQ4. What is the impact of having unlabelled classes? In Figure 25(c) and Figure 25(d) we report the results obtained in the experiments described in Section 6 (RQ4) wrt. Acc(C), Acc(Y) and Cls(C) on the MNIST-EvenOdd task and the Kand-Logic task, respectively. As expected, the more classes are labelled the better the results become. However, it is interesting to note that—in the MNIST-EvenOdd task—even by labelling only two images we obtain better results over the concepts than using the standard NeSy models. The same happens for the Kand-Logic task, where we need at least two examples for the shape primitives and two for the colour primitives. However, we can again see that with just four labelled examples we get better results than all the standard NeSy models. RQ5: How important is the centroid initialization for unlabelled classes? In Figure 25(e) we report the results obtained wrt. F1(C), Acc(C) and Cls(C) for different lower-tail quantiles of the $\chi^{2}$ distribution. Clearly, choosing $p=0.99$ improved our results—no matter the metric considered.